log .pdf



Nom original: log.pdf

Ce document au format PDF 1.4 a été généré par / iText 2.1.7 by 1T3XT, et a été envoyé sur fichier-pdf.fr le 08/04/2012 à 05:56, depuis l'adresse IP 85.170.x.x. La présente page de téléchargement du fichier a été vue 1911 fois.
Taille du document: 382 Ko (47 pages).
Confidentialité: fichier public




Télécharger le fichier (PDF)










Aperçu du document


Sat Apr 07 14:29:52 CEST 2012

1. General Description
This Document contains the log data of a read out logfile. It shows what happened with the specified vbar unit during
the latest time
Version of PC Software
Date
Serial
Prod Date
Firmware
Patchlevel

Page: 1

5.2.3 30.08.2011
Sat Apr 07 14:29:52 CEST 2012
1410026695
31.1.2011 14:36
5.2
4

Sat Apr 07 14:29:52 CEST 2012

2. Chronological List of Events

Page: 2

0:16 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:17 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:17 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:17 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:17 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:18 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:18 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:18 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:18 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:19 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:19 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:19 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:19 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:20 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:20 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:20 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

Page: 3

0:20 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:21 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:21 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:21 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:21 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:22 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:22 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:22 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:22 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:23 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:23 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:23 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:23 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:24 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:24 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:24 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:24 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

Page: 4

0:25 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:25 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:25 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:25 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:26 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:26 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:26 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:26 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:27 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:27 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:27 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:27 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:28 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:28 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:28 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:28 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:29 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

Page: 5

0:29 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:29 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:29 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:30 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:30 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:30 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:30 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:31 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:31 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:31 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:31 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:32 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:32 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:32 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:32 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:42 Good Health Message
(10sec)
0:51 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

0:51 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

Page: 6

0:51 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:51 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:52 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:52 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:52 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:52 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:53 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:53 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:53 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:53 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:54 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:54 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:54 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:54 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:59 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

0:59 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

0:59 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

Page: 7

0:59 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:00 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:00 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:00 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:00 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:01 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:01 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:01 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:01 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:02 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:02 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:02 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:02 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:03 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:03 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:03 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:03 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

Page: 8

1:04 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:04 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:04 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:04 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:05 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:05 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:05 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:05 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:06 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:06 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:06 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:06 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:07 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:07 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:07 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:07 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:08 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

Page: 9

1:08 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:08 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:08 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:15 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:15 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:15 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:15 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:16 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:16 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:16 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:16 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:17 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:17 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:17 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:17 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:18 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:18 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

1:18 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:18 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:26 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:26 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:26 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:26 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:27 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:27 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:27 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:27 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:28 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:28 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:28 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:28 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:29 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:29 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:29 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 10

Sat Apr 07 14:29:52 CEST 2012

1:29 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:30 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:30 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:30 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:30 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:31 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:31 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:31 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:31 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:32 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:32 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:32 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:32 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:39 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:39 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:39 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:39 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 11

Sat Apr 07 14:29:52 CEST 2012

1:40 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:40 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:40 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:40 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:41 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:41 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:41 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:41 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:42 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:42 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:42 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:42 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:51 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:51 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:51 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:51 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:52 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 12

Sat Apr 07 14:29:52 CEST 2012

1:52 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:52 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:52 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:53 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:53 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:53 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:53 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:54 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

1:54 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:54 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

1:54 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:02 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:02 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:02 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:02 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:03 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:03 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 13

Sat Apr 07 14:29:52 CEST 2012

2:03 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:03 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:04 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:04 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:04 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:04 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:05 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:05 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:05 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:05 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:08 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:08 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:08 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:08 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:09 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:09 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:09 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 14

Sat Apr 07 14:29:52 CEST 2012

2:09 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:10 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:10 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:10 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:10 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:11 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:11 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:11 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:11 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:21 Good Health Message
(10sec)
2:23 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

2:23 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:23 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:23 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:24 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:24 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:24 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:24 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 15

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

2:25 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:25 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:25 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:25 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:26 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:26 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:26 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:26 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:27 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:27 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:27 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:27 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:28 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:28 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:28 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:28 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:29 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 16

Sat Apr 07 14:29:52 CEST 2012

2:29 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:29 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:29 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:30 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:30 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:30 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:30 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:31 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:31 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:31 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:31 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:32 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:32 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:32 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:32 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:42 Good Health Message
(10sec)
2:47 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

2:47 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 17

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

2:47 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:47 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:48 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:48 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:48 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:48 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:49 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:49 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:49 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:49 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:50 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

2:50 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:50 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

2:50 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:00 Good Health Message
(10sec)
3:02 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

3:02 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:02 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 18

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

3:02 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:03 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:03 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:03 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:03 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:04 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:04 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:04 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:04 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:05 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:05 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:05 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:05 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:15 Good Health Message
(10sec)
3:20 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

3:20 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:20 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:20 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 19

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

3:21 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:21 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:21 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:21 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:22 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:22 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:22 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:22 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:23 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:23 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:23 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:23 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:24 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:24 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:24 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:24 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:25 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 20

Sat Apr 07 14:29:52 CEST 2012

3:25 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:25 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:25 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:26 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:26 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:26 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

3:26 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

3:36 Good Health Message
(10sec)
3:46 Good Health Message
(10sec)
3:56 Good Health Message
(10sec)
4:06 Good Health Message
(10sec)
4:16 Good Health Message
(10sec)
4:26 Good Health Message
(10sec)
4:35 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

4:35 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:35 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:35 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:36 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:36 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 21

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

4:36 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:36 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:37 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:37 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:37 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:37 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:38 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:38 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:38 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:38 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:46 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:46 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:46 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:46 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:47 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:47 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:47 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 22

Sat Apr 07 14:29:52 CEST 2012

4:47 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:48 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:48 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:48 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:48 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:49 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:49 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:49 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:49 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:55 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:55 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:55 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:55 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:56 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:56 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:56 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:56 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 23

Sat Apr 07 14:29:52 CEST 2012

4:57 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:57 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:57 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:57 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:58 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

4:58 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:58 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

4:58 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

5:08 Good Health Message
(10sec)
5:16 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

5:16 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

5:16 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

5:16 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

5:17 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

5:17 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

5:17 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

5:17 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

5:18 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 24

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

5:18 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

5:18 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

5:18 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

5:19 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

5:19 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

5:19 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

5:19 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

5:29 Good Health Message
(10sec)
5:39 Good Health Message
(10sec)
5:49 Good Health Message
(10sec)
5:59 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

5:59 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

5:59 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

5:59 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:00 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:00 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:00 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:00 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 25

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

6:01 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:01 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:01 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:01 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:02 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:02 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:02 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:02 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:09 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:09 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:09 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:09 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:10 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:10 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:10 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:10 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:11 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 26

Sat Apr 07 14:29:52 CEST 2012

6:11 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:11 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:11 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:12 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:12 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:12 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:12 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:22 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:22 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:22 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:22 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:23 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:23 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:23 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:23 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:24 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:24 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 27

Sat Apr 07 14:29:52 CEST 2012

6:24 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:24 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:25 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:25 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:25 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:25 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:29 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:29 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:29 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:29 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:30 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:30 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:30 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:30 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:31 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:31 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:31 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 28

Sat Apr 07 14:29:52 CEST 2012

6:31 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:32 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:32 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:32 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:32 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:37 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:37 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:37 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:37 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:38 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:38 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:38 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:38 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:44 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:44 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:44 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:44 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 29

Sat Apr 07 14:29:52 CEST 2012

6:45 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:45 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:45 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:45 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:46 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:46 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:46 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:46 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:47 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:47 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:47 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

6:47 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

6:57 Good Health Message
(10sec)
7:07 Good Health Message
(10sec)
7:16 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

7:16 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:16 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:16 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 30

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

7:17 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:17 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:17 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:17 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:18 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:18 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:18 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:18 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:19 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:19 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:19 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:19 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:29 Good Health Message
(10sec)
7:30 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

7:30 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:30 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:30 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:31 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 31

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

7:31 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:31 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:31 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:32 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:32 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:32 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:32 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:33 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:33 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:33 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:33 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:43 Good Health Message
(10sec)
7:51 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

7:51 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:51 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:51 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:52 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:52 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 32

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

7:52 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:52 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:53 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:53 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:53 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:53 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:54 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:54 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:54 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:54 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:59 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

7:59 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:59 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

7:59 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:00 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:00 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:00 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 33

Sat Apr 07 14:29:52 CEST 2012

8:00 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:01 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:01 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:01 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:01 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:02 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:02 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:02 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:02 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:12 Good Health Message
(10sec)
8:16 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

8:16 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:16 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:16 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:17 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:17 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:17 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:17 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 34

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

8:18 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:18 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:18 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:18 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:19 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:19 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:19 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:19 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:24 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:24 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:24 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:24 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:25 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:25 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:25 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:25 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:26 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 35

Sat Apr 07 14:29:52 CEST 2012

8:26 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:26 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:26 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:27 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:27 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:27 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:27 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:35 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:35 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:35 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:35 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:36 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:36 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:36 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:36 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:37 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:37 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 36

Sat Apr 07 14:29:52 CEST 2012

8:37 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:37 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:38 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:38 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:38 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:38 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:48 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:48 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:48 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:48 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:49 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:49 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:49 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:49 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:50 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:50 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:50 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 37

Sat Apr 07 14:29:52 CEST 2012

8:50 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:51 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:51 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:51 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:51 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:57 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:57 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:57 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:57 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:58 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:58 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:58 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:58 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:59 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

8:59 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:59 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

8:59 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 38

Sat Apr 07 14:29:52 CEST 2012

9:00 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

9:00 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:00 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:00 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

9:10 Good Health Message
(10sec)
9:20 Good Health Message
(10sec)
9:30 Good Health Message
(10sec)
9:40 Good Health Message
(10sec)
9:50 RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

9:50 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:50 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:50 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

9:51 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

9:51 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:51 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:51 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

9:52 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

9:52 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:52 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 39

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Sat Apr 07 14:29:52 CEST 2012

9:52 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

9:53 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

9:53 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:53 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:53 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

9:59 RC Input of Pitch
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

9:59 RC Input of Aileron
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:59 RC Input of Elevator
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

9:59 RC Input of Tail
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Pitch
0
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Aileron
0
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Elevator
0
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Tail
0
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Pitch
1
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Aileron
1
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Elevator
1
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Tail
1
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 40

Sat Apr 07 14:29:52 CEST 2012

10:0 RC Input of Pitch
2
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Aileron
2
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Elevator
2
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Tail
2
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Pitch
5
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Aileron
5
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Elevator
5
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Tail
5
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Pitch
6
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Aileron
6
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Elevator
6
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Tail
6
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Pitch
7
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Aileron
7
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Elevator
7
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Tail
7
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:0 RC Input of Pitch
8
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 41

Sat Apr 07 14:29:52 CEST 2012

10:0 RC Input of Aileron
8
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Elevator
8
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:0 RC Input of Tail
8
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:1 RC Input of Pitch
8
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:1 RC Input of Aileron
8
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:1 RC Input of Elevator
8
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:1 RC Input of Tail
8
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:1 RC Input of Pitch
9
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:1 RC Input of Aileron
9
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:1 RC Input of Elevator
9
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:1 RC Input of Tail
9
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:2 RC Input of Pitch
0
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:2 RC Input of Aileron
0
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:2 RC Input of Elevator
0
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:2 RC Input of Tail
0
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:2 RC Input of Pitch
1
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:2 RC Input of Aileron
1
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 42

Sat Apr 07 14:29:52 CEST 2012

10:2 RC Input of Elevator
1
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

10:2 RC Input of Tail
1
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

10:3
1
10:4
1
10:5
1
11:0
1
11:1
1
11:2
1
11:3
1
11:4
1
11:5
1
11:5
9

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
RC Input of Pitch
Channel missed

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

11:5 RC Input of Aileron
9
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

11:5 RC Input of Elevator
9
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

11:5 RC Input of Tail
9
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

12:0 RC Input of Pitch
0
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

12:0 RC Input of Aileron
0
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

12:0 RC Input of Elevator
0
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

12:0 RC Input of Tail
0
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

12:0 RC Input of Pitch
1
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

12:0 RC Input of Aileron
1
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

Page: 43

Sat Apr 07 14:29:52 CEST 2012

12:0 RC Input of Elevator
1
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

12:0 RC Input of Tail
1
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

12:0 RC Input of Pitch
2
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

12:0 RC Input of Aileron
2
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

12:0 RC Input of Elevator
2
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

12:0 RC Input of Tail
2
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

12:1
2
12:2
2
12:3
2
12:4
2
12:5
2
13:0
2
13:0
5

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
High Vibration Level

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

13:1 Extreme Vibration
4
Level

Vibrations are extreme. That means, that the measurement signal is much lower than the signal level
of the vibrations. No usable flying is possible with this level. Everything has to be checked and
extended tests are needed to isolate and eliminate the source of vibrations

13:2 High Vibration Level
4

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

13:3 High Vibration Level
3

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

13:4 High Vibration Level
3

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

13:5 High Vibration Level
3

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

14:0 High Vibration Level
2

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

14:1 High Vibration Level
2

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

14:2 Raised Vibration Level
2

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

14:3 High Vibration Level
1

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

14:4 Raised Vibration Level
1

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

Page: 44

Sat Apr 07 14:29:52 CEST 2012

14:5 High Vibration Level
0

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

15:0 Raised Vibration Level
0

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

15:1 High Vibration Level
0

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

15:1 Raised Vibration Level
9

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

15:2 Raised Vibration Level
9

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

15:3 Raised Vibration Level
8

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

15:4 Raised Vibration Level
8

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

15:5 Raised Vibration Level
8

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

16:0 Raised Vibration Level
7

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

16:1 High Vibration Level
7

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

16:2 Raised Vibration Level
7

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

16:3 Raised Vibration Level
6

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

16:4 High Vibration Level
6

The control loop suffers from a high vibration level, that starts to render the sensors blind. Save flying
is possible, but the stability will be degraded. Additinally slow drifts that happen may be caused by
vibrations.

16:5 Raised Vibration Level
5

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

16:5 Sensor Data
9
Checksum Error

Each Data packed from the sensor carries a checksum. If this checksum does not match with the
calculated checksum, this error is thrown. Since packets are repeated very fast, this is not a complete
control lost. The sensor data is going to hold until a valid checkum is calculated. This error pints to
some wiring problems of the sensor. It also may occur if static discharges hit the sensor or the
connection to the sensor.

17:0 Raised Vibration Level
5

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

17:1 Raised Vibration Level
5

There was detected a raised level of Vibration. Since the vibration detector has to decide which signal
is vibration and chis is the intended measurement signal, this can happen sometimes on hard 3d
moves. It shall not happen all the time. If this error is reported repedidtly very often, check the heli for
vibration sources.

17:2 RC Input of Pitch
2
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

17:2 RC Input of Aileron
2
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

17:2 RC Input of Elevator
2
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

17:2 RC Input of Tail
2
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

Page: 45

Sat Apr 07 14:29:52 CEST 2012

17:2 RC Input of Channel 2
2
out of Range

Channel 2 actively recived a Signal that is out of the specified Signal range of 0.8ms .. 2.2ms. These
Signals are ignored, but point to a serious problem with the configuration. Make sure you never leave
the valid signal range of the inputs. Invalid inputs will trigger the missing signal error as well, because
there is no usable signal anymore. This has to be done in this way, because bad connections tend to
create invalid signals because of glitches.

17:2 RC Input of Channel 3
2
out of Range

Channel 3 actively recived a Signal that is out of the specified Signal range of 0.8ms .. 2.2ms. These
Signals are ignored, but point to a serious problem with the configuration. Make sure you never leave
the valid signal range of the inputs. Invalid inputs will trigger the missing signal error as well, because
there is no usable signal anymore. This has to be done in this way, because bad connections tend to
create invalid signals because of glitches.

17:2 RC Input of Channel 4
2
out of Range

Channel 4 actively recived a Signal that is out of the specified Signal range of 0.8ms .. 2.2ms. These
Signals are ignored, but point to a serious problem with the configuration. Make sure you never leave
the valid signal range of the inputs. Invalid inputs will trigger the missing signal error as well, because
there is no usable signal anymore. This has to be done in this way, because bad connections tend to
create invalid signals because of glitches.

17:2 RC Input of Channel 5
2
out of Range

Channel 5 actively recived a Signal that is out of the specified Signal range of 0.8ms .. 2.2ms. These
Signals are ignored, but point to a serious problem with the configuration. Make sure you never leave
the valid signal range of the inputs. Invalid inputs will trigger the missing signal error as well, because
there is no usable signal anymore. This has to be done in this way, because bad connections tend to
create invalid signals because of glitches.

17:2 RC Input of Channel 6
2
out of Range

Channel 6 actively recived a Signal that is out of the specified Signal range of 0.8ms .. 2.2ms. These
Signals are ignored, but point to a serious problem with the configuration. Make sure you never leave
the valid signal range of the inputs. Invalid inputs will trigger the missing signal error as well, because
there is no usable signal anymore. This has to be done in this way, because bad connections tend to
create invalid signals because of glitches.

17:2 RC Input of Pitch
3
Channel missed

The Pitch Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

17:2 RC Input of Aileron
3
Channel missed

The Aileron Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

17:2 RC Input of Elevator
3
Channel missed

The Elevator Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if
for 50ms no new signal arrives from the reciver. Depending on the hardware connection this can point
to a problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels
will be accused at the same time. In case of single channels, this can happen seperately on each
channel. Closely check your wiring for broken wires or connection problems

17:2 RC Input of Tail
3
Channel missed

The Tail Input Signal ist updated with each Frame recived from the reciver. This Error is raised, if for
50ms no new signal arrives from the reciver. Depending on the hardware connection this can point to a
problem with the connection to the reciver/sattelite. In case of sattelite recivers used, all channels will
be accused at the same time. In case of single channels, this can happen seperately on each channel.
Closely check your wiring for broken wires or connection problems

17:2 Extreme Vibration
4
Level

Vibrations are extreme. That means, that the measurement signal is much lower than the signal level
of the vibrations. No usable flying is possible with this level. Everything has to be checked and
extended tests are needed to isolate and eliminate the source of vibrations

17:2 Aileron Sensor Value
6
out of Range

The Sensor delivers Values that are not trustful. Rotational rates, that will create this values are
usually not possible in air. The Sensor may be defective. This can happen in certain cases if the heli is
handleled on ground, or on very hard landings or very extreme Vibrations.

17:3 Extreme Vibration
4
Level

Vibrations are extreme. That means, that the measurement signal is much lower than the signal level
of the vibrations. No usable flying is possible with this level. Everything has to be checked and
extended tests are needed to isolate and eliminate the source of vibrations

17:4
4
17:5
4
18:0
4
0:00

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

Good Health Message
(10sec)
Good Health Message
(10sec)
Good Health Message
(10sec)
Coldstart

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
A Coldstart is done on the beginning of each switch on time. A Coldstart can happen only, if the VBar
Units is disconnected from power for more than 5 Seconds.

0:00 Reset Reason: Power
On

This happens if power is applied to the VBar unit. Usually this is ok, but it shall never happen in
operational mode. So if a reset happens during flight, this points to a power problem. During flight the
power on reset results in a warmstart. If a coldstart happens during flight, the power loss was more
than 5 Seconds

0:00 Bank 0 Loaded

Bank 0 was loaded from the non volatile memory. This can be triggered my manual backswitch from
the userinterface as well as in flight if bank switch is programmed to the aux channel. On Startup the
Bank 0 is loaded by default.

0:03 Init Failed, retrying...

The Init process of the sensors is very sensitive to movements of the heli or from other external
disturbances, i.e. Voltage jumps and glitches. This can lead to a failed initialization. In this Case it is
repeated. If this repeats itself all the time, this can point to a defective sensors.

0:05 Init Failed, retrying...

The Init process of the sensors is very sensitive to movements of the heli or from other external
disturbances, i.e. Voltage jumps and glitches. This can lead to a failed initialization. In this Case it is
repeated. If this repeats itself all the time, this can point to a defective sensors.

0:09 Calibration Finished

At each Coldstart, the sensor and RC Values are calibrated to the actual seen values. If the calibration
is finished, this message confirms the storage of data into the internal non volatile calibration memory

0:19 Good Health Message
(10sec)

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.

Page: 46

Sat Apr 07 14:29:52 CEST 2012

0:29 Good Health Message
(10sec)
0:39 Good Health Message
(10sec)

Page: 47

This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.
This Message describes the good health state. That means, that the VBar unit does not see any error
or Info Message in the last 10 Seconds.



Documents similaires


log
mg124cx fr om
bascube
sabertooth 2x32 resume
charvetieee2011
dynamic frequency selection and the 5ghz unlicensed band


Sur le même sujet..