Fichier PDF

Partage, hébergement, conversion et archivage facile de documents au format PDF

Partager un fichier Mes fichiers Convertir un fichier Boite à outils PDF Recherche PDF Aide Contact



E87PDCRetrofit .pdf



Nom original: E87PDCRetrofit.pdf
Titre: untitled

Ce document au format PDF 1.3 a été généré par FrameMaker 7.1 / Acrobat Distiller 6.0 (Windows), et a été envoyé sur fichier-pdf.fr le 12/02/2013 à 20:41, depuis l'adresse IP 37.160.x.x. La présente page de téléchargement du fichier a été vue 2114 fois.
Taille du document: 1.4 Mo (29 pages).
Confidentialité: fichier public




Télécharger le fichier (PDF)









Aperçu du document


Parts and Accessories.
Installation Instructions.
Park Distance Control (PDC) Retrofit Kit
BMW 1 Series (E 81, E 87)

These installation instructions are not valid for cars with the aerodynamics package
Retrofit kit No.

66 20 0 396 792
66 20 0 396 793
66 20 0 433 996
66 20 0 433 997

PDC front retrofit kit
PDC rear retrofit kit
PDC front retrofit kit
PDC rear retrofit kit

Installation time
The installation time for the rear PDC retrofit and the front PDC upgrade is approx. 3.5 hours each.
If the rear PDC retrofit and the front PDC upgrade are installed at the same time, the installation time is
approx. 5.5 hours. This may vary depending on the condition of the car and the equipment in it.
In general the car must be upgraded to the latest I stage status by flashing before starting the work.
Depending on the production age of the car and the work already carried out on the car, the
programming times will vary, which means that we cannot quote a specific time at this point.
The installation time does not include any time for programming/encoding, as this depends on the age
of the car and the equipment in it.
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation
and by authorised BMW service companies.
In any event, the target group for these installation instructions is specialist personnel trained on BMW
cars with the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals
and work instructions in a rational order using the prescribed tools (special tools) and observing current
health and safety regulations.
In the event of any installation or function problems, restrict the troubleshooting session to
about 0.5 hours for mechanical work or 1 hour for electrical work.
In order to reduce costs and avoid any additional expense, send a query immediately to the Technical
Parts Support via the Aftersales Assistance Portal (ASAP).
Specify the following information:
- Chassis number
- Part number of the retrofit kit
- A precise description of the problem
- Any work already carried out.
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP!

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

1

Pictograms
Denotes instructions that draw your attention to special features.



Denotes the end of the instruction or other text.

Installation information
Rear bumper strip P and bumper strips at front left AE and front right AF must be painted subject to
consultation with the customer.
Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. The costs
thereby incurred will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are already used, bridges, double crimps or twin-lead terminals must be
used.
After the installation work, the retrofit must be programmed / coded via the Retrofit or Conversion path.
All pictures show LHD cars; proceed accordingly on RHD cars.
Ordering instructions
Check colour versions and technical equipment. The following parts are not supplied in the kits and must
be ordered separately (see EPC for part number and details).
For rear PDC retrofit
- Control unit D
- Sensors K
For front PDC upgrade/retrofit
- Control unit R
- Sensors V
- Centre console switch centre AB
- Trim for centre dashboard Y
- Trim Z and AA
List of special equipment
The following special equipment must be taken into consideration when installing the retrofit kit:
SA 507
SA 606
SA 609
SA 663

Park Distance Control (PDC), rear
Business navigation system
Professional navigation system
BMW Professional radio

Special tools required
00 9 317, Installation wedges

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

2

Table of contents
Section

Page

1.

Rear PDC retrofit parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

2.

Front PDC upgrade/retrofit parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

3.

Preparatory work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

4.

Rear PDC retrofit connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

5.

Front PDC upgrade/retrofit connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6.

Rear PDC retrofit installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

7.

Front PDC upgrade/retrofit installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

8.

To install the sensors and speaker at the rear (rear PDC retrofit) . . . . . . . . . . . . . . . . . . . . . . . . . 15

9.

To install the sensors and speaker at the front (front PDC upgrade/retrofit) . . . . . . . . . . . . . . . 16

10. To install the control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
11. To install and connect the rear PDC wiring harnesses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
12. To install and connect the front PDC wiring harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
13. Installing the centre console switch centre (front PDC upgrade/retrofit) . . . . . . . . . . . . . . . . . . 24
14. Concluding work and coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
15. Circuit diagram for front and rear PDC (cars built before 03/07 only) . . . . . . . . . . . . . . . . . . . . . 26
16. Circuit diagram for front and rear PDC (cars built after 03/07 only) . . . . . . . . . . . . . . . . . . . . . . . 28

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

3

1.

Rear PDC retrofit parts list

A
B

D

E

F

G

C

H

AG

087 0847 Z

Legend
A

Rear PDC wiring harness

B

Supply cable

C

Speaker cable (for cars built before 09/07 without SA 606/609/663 only)

D

Control unit (not supplied in the retrofit kit)

E

Module holder (cars built before 09/06 only)

F

Speed nut (2x, for cars built before 09/06 only)

G

Miniature connector (3x)

H
AG

Cable tie 200 x 3.6 mm (20x)
Module holder (cars built after 09/06 only)

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

4

1.

Rear PDC retrofit parts list

I

N

J

O

L

K

M

P

087 0411 Z

Legend
I
J
K
L
M
N
O
P

Rear speaker (for cars built before 09/07 without SA 606/609/663 only)
Hexagonal nut M6 (for cars built before 09/07 without SA 606/609/663 only)
Sensor (4x, not supplied in the retrofit kit)
Disconnecting ring (4x)
Sensor holder (4x, different coding)
Fusible link 5 A
Natural 18-pin socket casing
Rear bumper strip

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

5

2.

Front PDC upgrade/retrofit parts list

Q

R

T

S

V

W

U

X
087 0320 Z

Legend
Q
R
S
T
U
V
W
X

Front PDC wiring harness
Control unit (not supplied in the upgrade kit)
Cable tie 200 x 3.6 mm (20x)
Front speaker (for cars built before 09/07 without SA 606/609/663 only)
Adapter (for cars built before 09/07 without SA 606/609/663 only)
Sensor (4x, not supplied in the upgrade kit)
Disconnecting ring (4x)
Sensor holder (4x, different coding)

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

6

2.

Front PDC upgrade/retrofit parts list

BMW NAVIGATION PROFESSIONAL

Y

Z

AB

AC

AE

AA

AD

AF
087 0412 Z

Legend
Y
Z
AA
AB
AC
AD
AE
AF

Trim for centre dashboard (for cars without SA 609 and without a centre console switch centre
only, not supplied in the upgrade kit)
Trim (for cars without SA 609 and without a centre console switch centre only, not supplied in
the upgrade kit)
Trim (for cars with SA 609 and without a centre console switch centre only, not supplied in the
upgrade kit)
Centre console switch centre (not supplied in the retrofit kit)
SW 18-pin socket casing
SW 2-pin socket casing (for cars built before 09/07 without SA 606/609/663 only)
Left bumper strip
Right bumper strip

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

7

3.

Preparatory work
TIS No.
---

Conduct a brief test
Disconnect negative pole of battery

12 00 ...

The following components must be removed first of all
Rear PDC retrofit
Bumper trim (bottom section), rear

51 12 148

Bumper trim (top section), rear

51 12 156

Bumper strip for rear bumper

51 12 429

Luggage compartment floor trim

51 47 101

Right luggage compartment wheel arch trim

51 47 161

Roof pillar trim (C pillar) rear right
(for cars built before 09/07 without SA 606/609/663 only)

51 43 251

Top shoulder in the luggage compartment on the right
(for cars built before 09/07 without SA 606/609/663 only)

51 47 156

Backrest side section, rear seat, right

52 26 008

Door sill strip, rear (interior) right

51 47 030

Door sill strip, front (interior) right

51 47 000

Side footwell trim on right A pillar

51 43 070

Glovebox

51 16 366

Front PDC upgrade/retrofit
Front bumper trim

51 11 156

Bumper strip for front bumper, left and right

51 11 170
---

E box cover
Trim at the bottom right of the dashboard

51 45 181

Pedal trim
(for cars built before 09/07 without SA 606/609/663 only)

51 45 185

Side footwell trim on right A pillar

51 43 070

Heating/air-conditioning control

64 11 377

Switch centre, centre console

61 31 052/054

Trim for centre dashboard (for cars without SA 609 and without a centre
console switch centre only)

51 45 310

Door sill strip, front (interior) right

51 47 000

Door sill strip, rear (interior) right

51 47 030

Backrest side section, rear seat, right

52 26 008

Luggage compartment floor trim

51 47 101

Right luggage compartment wheel arch trim

51 47 161

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

8

4.

Rear PDC retrofit connection diagram

A1-A12

A

A13
A14
A15

B1

B

B2
B3
B4

A16
B5

C

C2

C1
Branch/
Item

O

C3
Designation

A

Rear PDC wiring harness

A1

Socket contact

087 0407 Z

Signal

Cable colour /
Cross-section

Connection site in the car

Abbreviation /
Slot

---

---

---

---

U_WHR

GN/VI

With socket casing O to control unit D

X18013
PIN 5

With socket casing O to control unit D

X18013
PIN 2

With socket casing O to control unit D

X18013
PIN 14

With socket casing O to control unit D

X18013
PIN 6

With socket casing O to control unit D

X18013
PIN 3

With socket casing O to control unit D

X18013
PIN 15

With socket casing O to control unit D

X18013
PIN 7

With socket casing O to control unit D

X18013
PIN 10

With socket casing O to control unit D

X18013
PIN 16

With socket casing O to control unit D

X18013
PIN 8

With socket casing O to control unit D

X18013
PIN 11

With socket casing O to control unit D

X18013
PIN 17

0.35 mm2
A2

Socket contact

M_WHR

BR/GE
0.35 mm2

A3

Socket contact

D_WHR

GE/BR
0.35 mm2

A4

Socket contact

U_WHMR

GN/GR
0.35 mm2

A5

Socket contact

M_WHMR

BR/BL
0.35 mm2

A6

Socket contact

D_WHMR

GE/SW
0.35 mm2

A7

Socket contact

U_WHML

GN/BR
0.35 mm2

A8

Socket contact

M_WHML

Brown/black
0.35 mm2

A9

Socket contact

D_WHML

GE/GN
0.35 mm2

A10

Socket contact

U_WHL

GN/SW
0.35 mm2

A11

Socket contact

M_WHL

BR/WS
0.35 mm2

A12

Socket contact

D_WHL

GE/GR
0.35 mm2

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

9

4.

Rear PDC retrofit connection diagram

A1-A12

A

A13
A14
A15

B1

B

B2
B3
B4

A16
B5

C

C2

C1
Branch/
Item

O

C3
Designation

Signal

Cable colour /
Cross-section

087 0407 Z

Connection site in the car

Abbreviation /
Slot

A13

SW 3-pin socket casing

---

---

On sensor K, rear right

A14

SW 3-pin socket casing

---

---

On sensor K, rear centre right

X18022

A15

SW 3-pin socket casing

---

---

On sensor K, rear centre left

X18021

A16

SW 3-pin socket casing

---

---

On sensor K, rear left

X18020

---

---

B

Supply cable

B1

Double flat spring contact

Terminal 15 GN/WS
0.50 mm2

B2

Joint connector contact

Terminal 31 Brown/black

X18023

---

---

Cars built before 03/07 only
On fuse holder A4010
Cars built after 03/07 only
On fuse holder A4010

X11003
PIN 8
X11001
PIN 7

On joint connector in the footwell on the right

X10012

0.50 mm2
B3

Twisted cable

CAN high

OR/GN
0.35 mm2

B4

Twisted cable

CAN low

GN
0.35 mm2

B5

SW 12-pin socket casing

C

Speaker cable

C1

SW 2-pin socket casing

C2

Socket contact

On the standard wiring harness in the footwell X15001
on the right
On the standard wiring harness in the footwell X15002
on the right

---

---

On control unit D

---

---

Only for cars built before 09/07
without SA 606/609/663

---

---

On rear speaker I

X14279

With branch B5 on control unit D

X300
PIN 4

With branch B5 on control unit D

X300
PIN 10

On control unit D

X18013

LS_HI+

BL/GN

X300

0.35 mm2
C3

Socket contact

LS_HI-

SW/GN
0.35 mm2

O
© BMW AG, Munich

Natural 18-pin socket casing

--01 29 0 396 791

---

8/2007

---

(Z/Z)

10

5.

Front PDC upgrade/retrofit connection diagram

Q9-Q20
Q

Q1
Q2
Q3

Q7

Q8

Q4
Q5

Q6

AC

AD
087 0313 Z

Branch/
Item

Designation

Signal

Cable colour /
Cross-section

Connection site in the car

Abbreviation /
Slot

Q

Front PDC wiring harness

---

---

---

Q1

SW 3-pin socket casing

---

---

On sensor V, front right

X18019

Q2

SW 3-pin socket casing

---

---

On sensor V, front centre right

X18018

Q3

SW 3-pin socket casing

---

---

On sensor V, front centre left

X18017

Q4

SW 3-pin socket casing

Q5

Socket contact, 2.5 mm

--LS_VO+

--BL/GR
0.35 mm2

Q6

Socket contact, 2.5 mm

LS_VO-

SW/RT
0.35 mm2

Q7

Socket contact

LS_VO+

BL/GR
0.35 mm2

Q8

Socket contact

LS_VO-

SW/RT
0.35 mm2

© BMW AG, Munich

01 29 0 396 791

---

On sensor V, front left

X18016

Only for cars built before 09/07
without SA 606/609/663
With socket casing AD to front speaker T
Only for cars built after 09/07 or
with SA 606/609/663
Insulate and tie back

X14278
PIN 1

Only for cars built before 09/07
without SA 606/609/663
With socket casing AD to front speaker T
Only for cars built after 09/07 or
with SA 606/609/663
Insulate and tie back

X14278
PIN 2

Only for cars built before 09/07
without SA 606/609/663
With branch B5 to control unit R
Only for cars built after 09/07 or
with SA 606/609/663
Insulate and tie back

X300
PIN 5

Only for cars built before 09/07
without SA 606/609/663
With branch B5 to control unit R
Only for cars built after 09/07 or
with SA 606/609/663
Insulate and tie back

X300
PIN 11

8/2007

---

---

---

---

(Z/Z)

11

5.

Front PDC upgrade/retrofit connection diagram

Q9-Q20
Q

Q1
Q2
Q3

Q7

Q8

Q4
Q5

Q6

AC

AD
087 0313 Z

Branch/
Item
Q9

Designation
Socket contact

Signal
U_WVR

Cable colour /
Cross-section
GN/VI

Connection site in the car
With socket casing AC to control unit R

X18362
PIN 8

With socket casing AC to control unit R

X18362
PIN 11

With socket casing AC to control unit R

X18362
PIN 17

With socket casing AC to control unit R

X18362
PIN 7

With socket casing AC to control unit R

X18362
PIN 10

With socket casing AC to control unit R

X18362
PIN 16

With socket casing AC to control unit R

X18362
PIN 6

With socket casing AC to control unit R

X18362
PIN 3

With socket casing AC to control unit R

X18362
PIN 15

With socket casing AC to control unit R

X18362
PIN 5

With socket casing AC to control unit R

X18362
PIN 2

With socket casing AC to control unit R

X18362
PIN 14

0.35 mm2
Q10

Socket contact

M_WVR

BR/GE
0.35 mm2

Q11

Socket contact

D_WVR

GE/BR
0.35 mm2

Q12

Socket contact

U_WVMR

GN/GR
0.35 mm2

Q13

Socket contact

M_WVMR

BR/BL
0.35 mm2

Q14

Socket contact

D_WVMR

GE/SW
0.35 mm2

Q15

Socket contact

U_WVML

GN/BR
0.35 mm2

Q16

Socket contact

M_WVML

Brown/black
0.35 mm2

Q17

Socket contact

D_WVML

GE/GN
0.35 mm2

Q18

Socket contact

U_WVL

GN/SW
0.35 mm2

Q19

Socket contact

M_WVL

BR/WS
0.35 mm2

Q20

Socket contact

D_WVL

GE/GR
0.35 mm2

AC

SW 18-pin socket casing

AD

SW 2-pin socket casing

© BMW AG, Munich

Abbreviation /
Slot

---

---

On control unit R

X18362

---

Only for cars built before 09/07
without SA 606/609/663
On front speaker T

X14278

---

8/2007

(Z/Z)

01 29 0 396 791

12

6.

Rear PDC retrofit installation and cabling diagram

1

B

I

C

D

K
A

K

1*
087 0321 Z

Legend
A
B
C
D
I
K

Rear PDC wiring harness
Supply cable
Speaker cable (for cars built before 09/07 without SA 606/609/663 only)
Control unit
Rear speaker (for cars built before 09/07 without SA 606/609/663 only)
Sensors

1

LHD cars only
Terminal 15 pick-up on fuse holder, connector X11003 (cars built before 03/07 only), connector
X11001 (cars built after 03/07 only)
Terminal 31 pick-up on joint connector X10012
CAN high and CAN low pick-up on standard wiring harness X15001 and X15002

1* RHD cars only
Terminal 15 pick-up on fuse holder, connector X11003 (cars built before 03/07 only), connector
X11001 (cars built after 03/07 only)
Terminal 31 pick-up on joint connector X10012
CAN high and CAN low pick-up on standard wiring harness X15001 and X15002

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

13

7.

Front PDC upgrade/retrofit installation and cabling diagram

Q

R

V
T*

AB

V
T
087 0322 Z

Legend
Q
R
T

Front PDC wiring harness
Control unit
For LHD cars built before 09/07 without SA 606/609/663 only
Speaker, front
T* For RHD cars built before 09/07 without SA 606/609/663 only
Speaker, front
V
Sensors
AB Switch centre, centre console

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

14

8.

To install the sensors and speaker at the rear (rear PDC retrofit)
Insert sensors K in decoupling rings L.

K

L
087 0397 Z

The positions in rear sensor holders M
are coded. Each of the four rear sensor
holders M will only fit into one position in rear
bumper strip P.

K
P

M

M

P

Clip rear sensor holders M into rear bumper
strip P.
Clip sensors K into rear sensor holders M.

1

Clip rear bumper strip P into the bumper trim (1).

P
087 0331 Z

C1

For cars built before 09/07 without
SA 606/609/663 only

C
1

I

Insert rear speaker I into the top shoulder (3)
using a stud bolt and fixing pin (2).
Secure rear speaker I with a hexagonal nut J.
Connect branch C1 on speaker cable C.
Secure speaker cable C to the lug (1).

J

2

3

Install the top shoulder (3).

087 0328 Z

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

15

9.

To install the sensors and speaker at the front (front PDC upgrade/retrofit)
Insert sensors V in decoupling rings W.

V

W
087 0399 Z

The positions in front sensor holder X
are coded. Each of the four front sensor
holders X will only fit into one position in left
bumper strip AE and right bumper strip AF.

AE

AF

X

Clip front sensor holder V into left bumper
strip AE and right bumper strip AF.
Clip sensors V into front sensor holders X.

V

V
1

Clip left bumper strip AE and right bumper
strip AF into the bumper trim (1).

087 0342 Z

For cars built before 09/07 without
SA 606/609/663 only

U
T/U

The interlocks on front speaker T, adapter U
and pedal trim are coded. They will only fit
into one position.
Clip front speaker T into adapter U.
Clip adapter U into the pedal trim (1).

T
1
087 0343 Z

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

16

10. To install the control unit
Cars before 09/06 only
Insert module holder E into the right-hand side of
the luggage compartment and secure it to the
existing coarse stud bolt with speed nuts F.

E

F

087 0325 Z

Rear PDC retrofit
Insert control unit D into module holder E.

D

E
087 0326 Z

Front PDC upgrade/retrofit
Insert control unit R into module holder E.

R

E
087 0327 Z

Cars after 09/06 only
Insert module holder AG into luggage compartment on the right.

AG
087 0849 Z

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

17

10. To install the control unit
Rear PDC retrofit
Insert control unit D into module holder AG.

D

AG
087 0850 Z

Front PDC upgrade/retrofit
Insert control unit R into module holder AG.

R

AG
087 0851 Z

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

18

11. To install and connect the rear PDC wiring harnesses
Route rear PDC wiring harness A into the holding
lugs on the holder (1).

1

A

Route branches A1–A12 through the
grommet (2) into the luggage compartment
to the control unit.

A1-A12
2

Seal the grommet (2).
Connect branches A13–A16 to the sensors K
(not shown).
Fit the bumper trim.

A16

A15

A14

A13

087 0332 Z

Connect branches A1–A12 to
socket casing O as follows:
- Branch A1, GN/VI cable, to PIN 5
- Branch A2, BR/GE cable, to PIN 2
- Branch A3, GE/BR cable, to PIN 14

O

- Branch A4, GN/GR cable, to PIN 6

A1-A12

- Branch A5, BR/BL cable, to PIN 3
- Branch A6, GE/SW cable, to PIN 15
- Branch A7, GN/BR cable, to PIN 7

087 0334 Z

- Branch A8, BR/SW cable, to PIN 10
- Branch A9, GE/GN cable, to PIN 16
- Branch A10, GN/SW cable, to PIN 8
- Branch A11, BR/WS cable, to PIN 11
- Branch A12, GE/GR cable, to PIN 17

For cars built before 09/07 without
SA 606/609/663 only

C

Route speaker cable C to control unit D.

O

Connect branches C2 and C3 to branch B5 as
follows:

C2
B5

D

© BMW AG, Munich

C3
087 0336 Z

01 29 0 396 791

- Branch C2, BL/GN cable, to PIN 4
- Branch C3, SW/GN cable, to PIN 10

All cars
Connect branch B5 and socket casing O to
control unit D.

8/2007

(Z/Z)

19

11. To install and connect the rear PDC wiring harnesses

B1-B4

1

Route branches B1–B4 along the standard
wiring harness to the fuse holder (1).

087 0337 Z

Cars built before 03/07 only
Release the fuse holder (1).
Connect branch B1, GN/WS cable, to PIN 8 of
plug X11003 (BL 15-pin).

B1

1

X11003

087 0338 Z

Cars built after 03/07 only
Release the fuse holder (1).

B1

Connect branch B1, GN/WS cable, to PIN 7 of
plug X11001 (BL 10-pin).

1
X11001
087 0825 Z

All cars
Route branch B2, BR/SW cable, to joint connector X10012 (BR/SW cable) and connect it.

G

If joint connector X10012 is fully occupied,
connect branch B2 using a miniature
connector G.

B2

X10012
© BMW AG, Munich

087 0340 Z

01 29 0 396 791

8/2007

(Z/Z)

20

11. To install and connect the rear PDC wiring harnesses
Connect branch B3, OR/GN cable, and
branch B4, GN cable, to the cables of the same
colours on the twisted cables (1) on the standard
wiring harness using miniature connectors G.

B3
1
G
1

B4

087 0341 Z

Cars built before 03/07 only
Fit the fuse holder (1).
Insert fusible link N into slot F 28.

N

1
087 0339 Z

Cars built between 03/07 and 09/07 only
Fit the fuse holder (1).
Insert fusible link N into slot F 28.

N
Cars built after 09/07 only

1

Fit the fuse holder (1).
Insert fusible link N into slot F 7.
087 0827 Z

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

21

12. To install and connect the front PDC wiring harness
Secure front PDC wiring harness Q to the
holder (1) and route it to behind the left headlight.
Connect branches Q1–Q4 to sensors V
(not shown).

Q
1

Q1 Q2

Fit the bumper trim.

Q3

Q4

087 0344 Z

Route branches Q5–Q20 along the standard
wiring harness through the grommet (2) and E
box (1) into the interior.

1

2

Q5-Q20

087 0346 Z

Only cars built after 09/07 or with
SA 606/609/663
Insulate and tie back branch Q5, BL/GR cable,
and branch Q6, SW/RT cable.
For cars built before 09/07 without
SA 606/609/663 only

Q5-Q6

Route branch Q5, BL/GR cable, and branch Q6,
SW/RT cable, along the standard wiring harness
to the pedals (1).

1
087 0347 Z

Connect branches Q5 and Q6 to socket
casing AD as follows:
- Branch Q5, BL/GR cable, to PIN 1

Q6

1

- Branch Q6, SW/RT cable, to PIN 2
Connect socket casing AD to front speaker T.

Q5
AD

T

Fit the pedal trim (1).

087 0349 Z

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

22

12. To install and connect the front PDC wiring harness
All cars

R

Q7-Q20

Route branches Q7–Q20 along the standard
wiring harness to control unit R.

087 0348 Z

Connect branches Q9–Q20 to socket
casing AC as follows:
- Branch Q9, GN/VI cable, to PIN 8
- Branch Q10, BR/GE cable, to PIN 11
- Branch Q11, GE/BR cable, to PIN 17

AC

- Branch Q12, GN/GR cable, to PIN 7

Q9-Q20

- Branch Q13, BR/BL cable, to PIN 10
- Branch Q14, GE/SW cable, to PIN 16
- Branch Q15, GN/BR cable, to PIN 6

087 0351 Z

- Branch Q16, BL/SW cable, to PIN 3
- Branch Q17, GE/GN cable, to PIN 15
- Branch Q18, GN/SW cable, to PIN 5
- Branch Q19, BR/WS cable, to PIN 2
- Branch Q20, GE/GR cable, to PIN 14
In cars with an existing SA 507, branch B5
corresponds to plug X300 already fitted in
the car.

AC

Only cars built after 09/07 or with
SA 606/609/663

Q7

Insulate and tie back branches Q7 and Q8.

B5
R

Q8
087 0352 Z

For cars built before 09/07 without
SA 606/609/663 only
Connect branches Q7 and Q8 to branch B5 as
follows:
- Branch Q7, BL/GR cable, to PIN 5
- Branch Q8, SW/RT cable, to PIN 11
All cars
Connect branch B5 and socket casing AC to
control unit R.

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

23

13. To install the centre console switch centre (front PDC upgrade/retrofit)

Y

Cars without SA 609 and without the centre
console switch centre only
Replace the trim for centre dashboard Y.
See TIS RA 51 45 310.
Clip centre console switch centre AB into trim Z.

AB

Cars without SA 609 and with the centre
console switch centre only

Z

Clip centre console switch centre AB into trim Z
that is already fitted in the car.

087 0414 Z

Clip trim Z into the trim for the centre dashboard.

1

Connect the plug (1) from centre console
switch centre AB to the heating/air-conditioning
control (2).

Z

Clip in the heating/air-conditioning control (2).

BMW BUSINE
SS CD

2

AB
087 0415 Z

Cars with SA 609 and without the centre
console switch centre only

AB

Clip centre console switch centre AB into
trim AA.

AA
BMW NAVIGATION PROFESSIONAL

087 0323 Z

AA
1

Clip trim AA into the trim for the centre
dashboard.
Connect the connection plug (1) from centre
console switch centre AB to the heating/airconditioning control (2).
Clip in the heating/air-conditioning control (2).

BMW NAVIG
ATION PROFE
SSIONAL

2

AB
087 0324 Z

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

24

14. Concluding work and coding
These retrofit systems require encoding.
- Connect the battery
Cars with an existing rear PDC only
- Encode/program the front PDC retrofit via path Conversion
All cars
- Encode/program the retrofit via path Retrofit
- Conduct a brief test
- Conduct a function test
- Re-fit the car components as required

© BMW AG, Munich

01 29 0 396 791

8/2007

(Z/Z)

25

8/2007

F28

H45/I*

2

2

1

1

10

LS_HI-

4

LS_HI+

CAN_L

11

LS_VO-

CAN_H

2

5

LS_VO+

KL. 31

H40/T*

X14278/
AD*

X300/
B5*

5A

Kl. 15

8

12

X14279/
C1*
X18020/
A16*

X18013/
O*

A81/D*/ R*

X18362/
AC*

U_WHML

D_WHL

M_WHL

2

1

B34/K*

3

2

1

B35/K*

3

X18022/
A14*

2

1

B36/K*

3

X18023/
A13*

2

1

(Z/Z)

087 0361 Z

B37/K*

3

14

2

5

15

3

6

16

D_WHR

M_WHR

10

U_WHR

D_WHMR

U_WHMR M_WHMR

D_WHML

D_WVR

M_WVR

17

8

11

M_WHML

16
U_WVR

10

D_WVMR

7

U_WVMR M_WVMR

15
D_WVML

1

2

3

M_WVML

3

X18019/
Q1*

7

6

1

2

3

17

X18021/
A15*

U_WVML

14
D_WVL

2
M_WVL

X18018/
Q2*

11

5

1

2

3

8

U_WHL

U_WVL

X18017/
Q3*

B33/V*

0,35 GN/SW

0,50 GN/WS

B32/V*

0,35 BR/WS

7

1

2

3

0,35 GN/SW

0,35 GE/GR

X300/
B5*

X18016/
Q4*

0,35 BR/WS

0,35 GN/BR

X15001/
B3*
X15002/
B4*
0,35 GE/GR

0,35 BR/SW

X11003/
B1*

0,35 GN/BR

B31/V*

0,35 BR/SW

B30/V*

0,35 GE/GN
0,35 GE/GN

X10012/
B2*

0,35 GN/GR
0,35 GN/GR

8

0,35 BR/BL
0,35 BR/BL

0,50 BR/SW

0,35 BL/GR

0,35 GE/SW
0,35 GE/SW

0,35 OR/GN

0,35 SW/RT

0,35 GN/VI
0,35 GN/VI

0,35 GN

0,35 BL/GN

0,35 BR/GE
0,35 BR/GE

01 29 0 396 791

0,35 SW/GN

0,35 GE/BR

© BMW AG, Munich

0,35 GE/BR

A4010

15. Circuit diagram for front and rear PDC (cars built before 03/07 only)

26

15. Circuit diagram for front and rear PDC (cars built before 03/07 only)
Legend
A81

Control unit, D* front PDC and R* rear PDC

A4010

Fuse holder

B30–B33 Front sensors, V*
B34–B37 Rear sensors, K*
H40

Front speaker, T* (for cars built before 09/07 without SA 606/609/663 only)

H45

Rear speaker, I* (for cars built before 09/07 without SA 606/609/663 only)

X300

SW 12-pin socket casing, B5*

X10012

Terminal 31 pick-up joint connector contact, B2*

X11003

BL 15-pin socket casing, B1*

X14278

2-pin SW socket casing, AD* (cars built before 09/07 without SA 606/609/663 only)

X14279

2-pin SW socket casing; C1* (cars built before 09/07 without SA 606/609/663 only)

X15001

Open cable, CAN high pick-up, B3*

X15002

Open cable, CAN low pick-up, B4*

X18013

Natural 18-pin socket casing, O*

X18016

SW 3-pin socket casing, Q4*

X18017

SW 3-pin socket casing, Q3*

X18018

SW 3-pin socket casing, Q2*

X18019

SW 3-pin socket casing, Q1*

X18020

SW 3-pin socket casing, A16*

X18021

SW 3-pin socket casing, A15*

X18022

SW 3-pin socket casing, A14*

X18023

SW 3-pin socket casing, A13*

X18362

SW 18-pin socket casing, AC*

All the designations marked with an asterisk (*) apply only to these installation instructions or this circuit diagram.

Cable colours
BL
BR
GE
GN
GR

© BMW AG, Munich

Blue
Brown
Yellow
Green
Grey

OR
RT
SW
VI
WS

01 29 0 396 791

Orange
Red
Black
Violet
White

8/2007

(Z/Z)

27

5A

8/2007

H45/I*

2

2

1

1

10

LS_HI-

4

LS_HI+

CAN_L

11

LS_VO-

CAN_H

2

5

LS_VO+

KL. 31

H40/T*

X14278/
AD*

X300/
B5*

F28
F7**

Kl. 15

8

12

X14279/
C1*
X18020/
A16*

X18013/
O*

A81/D*/ R*

X18362/
AC*

U_WHML

D_WHL

M_WHL

2

1

B34/K*

3

2

1

B35/K*

3

X18022/
A14*

2

1

B36/K*

3

X18023/
A13*

2

1

(Z/Z)

087 0826 Z

B37/K*

3

14

2

5

15

3

6

16

D_WHR

M_WHR

10

U_WHR

D_WHMR

U_WHMR M_WHMR

D_WHML

D_WVR

M_WVR

17

8

11

M_WHML

16
U_WVR

10

D_WVMR

7

U_WVMR M_WVMR

15
D_WVML

1

2

3

M_WVML

3

X18019/
Q1*

7

6

1

2

3

17

X18021/
A15*

U_WVML

14
D_WVL

2
M_WVL

X18018/
Q2*

11

5

1

2

3

8

U_WHL

U_WVL

X18017/
Q3*

B33/V*

0,35 GN/SW

0,50 GN/WS

B32/V*

0,35 BR/WS

7

1

2

3

0,35 GN/SW

0,35 GE/GR

X300/
B5*

X18016/
Q4*

0,35 BR/WS

0,35 GN/BR

X15001/
B3*
X15002/
B4*
0,35 GE/GR

0,35 BR/SW

X11001/
B1*

0,35 GN/BR

B31/V*

0,35 BR/SW

B30/V*

0,35 GE/GN
0,35 GE/GN

X10012/
B2*

0,35 GN/GR
0,35 GN/GR

7

0,35 BR/BL
0,35 BR/BL

0,50 BR/SW

0,35 BL/GR

0,35 GE/SW
0,35 GE/SW

0,35 OR/GN

0,35 SW/RT

0,35 GN/VI
0,35 GN/VI

0,35 GN

0,35 BL/GN

0,35 BR/GE
0,35 BR/GE

01 29 0 396 791

0,35 SW/GN

0,35 GE/BR

© BMW AG, Munich

0,35 GE/BR

A4010

16. Circuit diagram for front and rear PDC (cars built after 03/07 only)

28

16. Circuit diagram for front and rear PDC (cars built after 03/07 only)
Legend
A81

Control unit, D* front PDC and R* rear PDC

A4010

Fuse holder

B30–B33

Front sensors, V*

B34–B37

Rear sensors, K*

H40

Front speaker, T* (for cars built before 09/07 without SA 606/609/663 only)

H45

Rear speaker, I* (for cars built before 09/07 without SA 606/609/663 only)

X300

SW 12-pin socket casing, B5*

X10012

Terminal 31 pick-up joint connector contact, B2*

X11001

BL 10-pin socket casing, B1*

X14278

2-pin SW socket casing, AD* (cars built before 09/07 without SA 606/609/663 only)

X14279

2-pin SW socket casing; C1* (cars built before 09/07 without SA 606/609/663 only)

X15001

Open cable, CAN high pick-up, B3*

X15002

Open cable, CAN low pick-up, B4*

X18013

Natural 18-pin socket casing, O*

X18016

SW 3-pin socket casing, Q4*

X18017

SW 3-pin socket casing, Q3*

X18018

SW 3-pin socket casing, Q2*

X18019

SW 3-pin socket casing, Q1*

X18020

SW 3-pin socket casing, A16*

X18021

SW 3-pin socket casing, A15*

X18022

SW 3-pin socket casing, A14*

X18023

SW 3-pin socket casing, A13*

X18362

SW 18-pin socket casing, AC*

All the designations marked with an asterisk (*) apply only to these installation instructions or this circuit diagram.

Cable colours
BL
BR
GE
GN
GR

© BMW AG, Munich

Blue
Brown
Yellow
GN
Green

OR
RT
SW
VI
WS

01 29 0 396 791

Orange
Red
Black
Violet
White

8/2007

(Z/Z)

29


Documents similaires


Fichier PDF e90mirrorcables
Fichier PDF notice utilisation converti
Fichier PDF e87pdcretrofit
Fichier PDF viessmann marklin retrosignalisation 5217
Fichier PDF speak english like an american idioms and vocabulary 1
Fichier PDF estyma p6 glisse e s 2


Sur le même sujet..