Fichier PDF

Partage, hébergement, conversion et archivage facile de documents au format PDF

Partager un fichier Mes fichiers Boite à outils PDF Recherche Aide Contact



MXer50 cap 08 (statore volano) .pdf



Nom original: MXer50 cap 08 (statore volano).pdf

Ce document au format PDF 1.3 a été généré par Word / Mac OS X 10.2.8 Quartz PDFContext, et a été envoyé sur fichier-pdf.fr le 18/03/2013 à 14:13, depuis l'adresse IP 92.155.x.x. La présente page de téléchargement du fichier a été vue 328 fois.
Taille du document: 589 Ko (6 pages).
Confidentialité: fichier public




Télécharger le fichier (PDF)









Aperçu du document


8. A.C. GENERATOR

MX’er 50

8
__________________________________________________________________________________
__________________________________________________________________________________

__________________________________________________________________________________

__________________________________________________________________________________

__________________________________________________________________________________

A.C. GENERATOR
__________________________________________________________________________________

SERVICE INFORMATION........................................................ 8-2
A.C. GENERATOR REMOVAL................................................. 8-3

8

A.C. GENERATOR INSTALLATION ........................................ 8-4

8-0

8. A.C. GENERATOR

MX’er 50

Torque: 0.8_ 1.2kg-m

Torque: 3.5_ 4.0kg-m

Torque: 0.6_ 1.0kg-m

Torque: 0.8_ 1.2kg-m

8-1

8. A.C. GENERATOR

MX’er 50

SERVICE INFORMATION
GENERAL INSTRUCTIONS
• All A.C. generator maintenance and inspection can be made with the engine installed.
• Refer to Section 14, 15 for A.C. generator inspection.
TORQUE VALUE
Flywheel nut : 3.5_ 4.0kg-m
SPECIAL TOOLS
Flywheel puller
Universal holder

8-2

8. A.C. GENERATOR

MX’er 50
Fan Cover

A.C. GENERATOR REMOVAL
Remove the three bolts attaching the fan
cover to remove the fan cover.

Bolts

Remove the cooling fan by removing the
four bolts.

Bolt

Cooling Fan

Nut

Hold the flywheel with an universal holder
and then remove the flywheel nut.

Universal Holder

8-3

8. A.C. GENERATOR

MX’er 50

Remove the A.C. generator flywheel using
the flywheel puller.

Flywheel Puller

A.C. Generator Wire Connector

Remove the A.C. generator wire connector.

Remove the two pulser coil bolts and pulser
coil from the right crankcase.
Remove the two bolts attaching the A.C.
generator stator.

Lock Nut Wrench

Stator

°ØBe careful not to damage the disconnected wire.

A.C. GENERATOR INSTALLATION
Install the A.C. generator stator and pulser
coil wire clamp onto the right crankcase, and
then install the pulser coil.
Pulser Coil

8-4

8. A.C. GENERATOR
Connect the A.C. generator wire connector.

MX’er 50
A.C. Generator Wire Connector

Woodruff Key

Clean the taper hole in the flywheel off any
burrs and dirt.
Install the woodruff key in the crankshaft
key way.

Universal Holder

Install the flywheel onto the crankshaft with
the flywheel groove aligned with the
crankshaft woodruff key.
Hold the flywheel with the universal holder
and install the 10mm flywheel flange nut.
Torque: 3.5_ 4.0kg-m
Start the engine and check the ignition
timing. (!3-7)
Install other removed parts in the reserve
order of removal.

8-5


Documents similaires


Fichier PDF 24479390
Fichier PDF mach 6 shock install removal
Fichier PDF r12rt bike plastic removal part 1
Fichier PDF engine
Fichier PDF mxer50 cap 08 statore volano
Fichier PDF feu de stop top case english


Sur le même sujet..