Tec ST 71 Product Description .pdf

TEC POS Terminal

ST-71 SERIES
Product Description
Document No. EO10-12028
Original
(Revised

Dec., 2005
)

Printed in Japan

EO10-12028

TABLE OF CONTENTS
Page

1. OUTLINE OF THE SYSTEM-------------------------------------------------------------------------1- 1
1.1

Features of the POS Terminal -------------------------------------------------------------------------- 1- 1

1.2

Description of Model Number --------------------------------------------------------------------------- 1- 2

1.3 Appearance-------------------------------------------------------------------------------------------------- 1- 3
1.3.1 Standard Model ---------------------------------------------------------------------------------------------1- 3
1.4

Available Options------------------------------------------------------------------------------------------- 1- 4

1.5

Example of POS Terminal with Some Options ----------------------------------------------------- 1- 4

1.6

Connectors--------------------------------------------------------------------------------------------------- 1- 5

1.7 Basic Specifications --------------------------------------------------------------------------------------- 1- 6
1.7.1 Engine Specifications--------------------------------------------------------------------------------------1- 7
1.7.2 Operating Display Specifications ----------------------------------------------------------------------1-13
1.7.3 Operating Environment ----------------------------------------------------------------------------------1-14
1.7.4 Power Supply Specifications ---------------------------------------------------------------------------1-14

2. DETAILED INFORMATION--------------------------------------------------------------------------2- 1
2.1

Block Diagram ---------------------------------------------------------------------------------------------- 2- 1

2.2

Block Diagram (PC Board Level)----------------------------------------------------------------------- 2- 2

2.3

Block Diagram (Display Section) ----------------------------------------------------------------------- 2- 3

2.4

Detailed Information about PC Standard Functions ----------------------------------------------- 2- 4

CAUTION!

1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA
TEC.
2. The contents of this manual may be changed without notification.
3. Please refer to your local Authorised Service representative with regard to any queries you
may have in this manual.

Copyright © 2005
by TOSHIBA TEC CORPORATION
All Rights Reserved
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN

1. OUTLINE OF THE SYSTEM

EO10-12028
1.1 Features of the POS Terminal

1.

OUTLINE OF THE SYSTEM

ST-71 Series is a high performance POS terminal which has been developed from the Industrial standard PC
architecture. This terminal provides all register functions required for a specialty store and enables the user
oriented system configuration.

1.1

Features of the POS Terminal

(1) The ST-71 Series POS terminal has been designed as a successor of the ST-60 series.
Two types of models are prepared according to the front display size, such as 12-inch TFT model and 15inch TFT model.
(2) The Intel® Celeron® 2.0GHz CPU is adopted.
The clock speed is 3 to 3.5 times of tht of the current model such as Celeron 566MHz (ST-60 series) and
ULV Celeron 650 MHz (ST-70 series).
(3) The 256 MB memory (non ECC type) is installed as standard. Up to 2 GB memory can be installed.
(4) Powered USB is adopted in addition to the USB, PCMCIA, and CF Interface which have been adopted for
the current models.
(5) A maximum of the two option HDDs (2.5-inch type) can be installed.
(6) Compact design body is adopted in common with the currently released ST-60 series.
(7) Windows® XP, Windows® 2000 and Linux are supported, however, neither Windows® 95/98/Me nor
Windows® is supported.
NOTES:
1. Windows 2000 and Windows XP are registered trademarks of Microsoft Corporation.
2. Intel and Celeron are registered trademarks of Intel Corporation.

1- 1

1. OUTLINE OF THE SYSTEM

EO10-12028
1.2 Description of Model Number

1.2

Description of Model Number

ST-71- T T - T T T T T - T QM - T
RoHS Compliance
Blank: Non-RoHS compliant model
R:
RoHS compliant model
Destination, Country/Region Code
QM: Standard for Worldwide
Pre-installed OS
Blank: None
Cabinet Color
K: Cool Black
Hardware Component
00

FCL1 (*)

none

PCMCIA/CF
Board
Not available

01

FCL1 (*)

HDD x1

Available

Touch Panel

HDD

LVDS 2ch
Board
Not available
Available

256 MB

MSR/I-button
Control Board
Not available

Additional
COM port
Not available

256 MB

Available

Available

Memory

CPU Type, CPU Clock
E: Celeron®2 GHz
Memory Capacity
1: 128 MB
2: 256 MB
3: 384 MB
4: 512 MB
5: 768 MB
Screen Size
2A: 12.1-inch TFT
5A: 15-inch TFT

NOTE:

Some combinations of the above specifications are not released as products.
For details, please contact your nearest authorized TOSHIBA TEC representative.

1- 2

1. OUTLINE OF THE SYSTEM

EO10-12028
1.3 Appearance

1.3

Appearance

1.3.1 Standard Model
< 12-inch display POS terminal >
MIC IN

Beep Volume

12” TFT Color Display with
Touch Panel
Reset Switch
Power Switch
Speaker Volume

HDD LED (Yellow)

Speaker

Power LED (Green)

Brightness Control

< 15-inch display POS terminal >

MIC IN

15” TFT Color Display with

Beep Volume

Touch Panel

Reset Switch
Power Switch
Speaker Volume
Speaker

HDD LED (Yellow)
Power LED (Green)

Brightness Control

1- 3

2. APPEARANCE

EO10-120028
1.4 Available Options

1.4

Available Options

12" 2nd Display

15" 2nd Display

PCMCIA/CF Board

LIU

LVDS PC Board

LIU Stand

Pole Unit

12" or 15" POS Terminal

Relay PC Board

iButton Unit

1.5

MCR

COM 5 or 6

Examples of POS Terminal with Some Options
• Example of ST-71 with an optional MCR
and 2nd display

• Example of ST-71 with an optional MCR,
iButton, and 2nd display

MCR Unit
(Option)
2nd display
(Option)

2nd Display
(Option)

MCR Unit
(Option)

MCR Unit (Option)
(When attached to the
left side of the display)

iButton (Option)

• Example of ST-71 with an optional LIU

(Front display: 12/15-inch TFT, Rear display: LIU + LIU stand)

• Example of ST-71 with an optional LIU

(Front display: 12/15-inch TFT, Rear display: LIU + Pole
unit + LIU stand)

LIU (Option)

Pole Unit (Option)

LIU (Option)

LIU Stand (Option)

LIU Stand (Option)

1- 4

1. OUTLINE OF THE SYSTEM

EO10-12028
1.6 Connectors

1.6

Connectors
COM5*
COM6*

AC Inlet

P-USB3
24VDC
outlet

PCMCIA*
LVDS2*

COM1

COM2

USB5

CF Card*

PS/2
Mouse

LPT

COM3

LVDS1

Display Power
and Signal

COM4

VGA

Line
Out

DRW1 DRW2 LAN USB4
PS/2 Keyboard

* : Option
Connector
AC inlet
24V DC outlet
PS/2 (Mouse, Keyboard)
USB3 (USB supplied with
power)
USB4,5 (General 5V USB)

LAN
DRW1, DRW2
LVDS1, 2
VGA
COM1, 2
COM3, 4, 5, 6

LPT1
Line-out
CF Card interface slot
PC Card interface slot

Description
A connector for the AC inlet
A terminal of a DC 24V line to which the power cable of the Receipt/Journal
printer is connected.
Mini-DIN 6-pin female type connector
Connector for the PS/2 type mouse, Connector for the PS/2 type keyboard
Connector for the USB (Universal Serial Bus) interface USB V2.0/1.1 and UHCI
(conforming to Universal Hub Controller Interface V2.0/1.1)
NOTE: USB functions may not be supported depending on the Operating
System.
USB3 is a USB socket supplied with power, which is 1 port of 24V USB. USB4
and USB5 can be used as general 5V USB connectors.
Modular type connector for the 10BASE-T/100BASE-TX LAN interface
A 24V type drawer is connectable.
Expandable LCD interface (LVDS2 is a option.)
Expandable VGA interface
15-pin VGA female type connector
D-sub 9-pin male type connector (without power)
A slot scanner, modem, serial interface type scale, EFT, etc. are connectable.
D-sub 9-pin female type connector (with +5V, +12V output)
A line display unit or RS-232C type hand scanner is connectable.
NOTES:
1. COM4 cannot be used when the touch panel TFT is connected to the POS
terminal.
2. When an optional back indicator unit is installed on the POS terminal, COM3
is not available.
3. COM5 and COM6 are available only when the optional kit is installed.
D-sub 25-pin female connector
Printer, etc. having a Centronics interface or equivalent are connectable.
Used for connecting an external speaker via the stereo mini jack terminal
TYPE II compact flash card conforming to CFA (Compact Flash Association)
standard can be used.
This complies with PC Card Standard Release 8.0.
32-bit Card Bus card and 16-bit PC card are supported. One slot is provided and
accepts up to TYPE II card.

1- 5

1. OUTLINE OF THE SYSTEM

EO10-12028
1.7 Basic Specifications

1.7

Basic Specifications
Item

Description

CPU
BIOS ROM
Chipset

12-inch Display Model
15-inch Display Model
Celeron® 2 GHz
Flash ROM 1 MB
Intel 82852GME (GMCH) + 82801DB (ICH4)

Memory

256 MB (DDR SDRAM)

USB3
USB4
USB5
Drawer
Parallel
+24VOUT

1 port (DIN 3-pin)

Size

12.1-inch 800 x 600 dots
15.0-inch 1024 x 768 dots
Analog Register Film
Analog Register Film
(1024 x 1024 dots)
(1024 x 1024 dots)
Option (12.1-inch or 15 inch)

FDD
CF Card
PCMCIA
Display interface
LAN
Sound
Interface

PS/2
COM1
COM2
COM3
COM4
COM5
COM6
USB1

FIU

Touch Panel
RIU

LCD type
Fluorescent
type

Socket 478

PC2100/2700 DDR SDRAM with
ECC/non ECC type
(Up to 2 GB memory is installed.)

Option
(Up to two units of the 2.5-inch HDDs can be installed.)
Option (External USB interface type)
Option
Option
An RGB port (Mini D-sub 15-pin) and an LVDS port (1st)
are provided as standard.
LVDS port (2nd): option (NOTE 1)
10/100Base TX (RJ-45 modular connector (with LED))
AC97 I/F
2 port (MINI-DIN 6-pin)
Provided D-SUB 9-pin male
Provided D-SUB 9-pin male
Provided D-SUB 9-pin female (with +5V, +12V)
Provided D-SUB 9-pin female (with +5V, +12V)
Option
D-SUB 9-pin female (with +5V, +12V)
Option
D-SUB 9-pin female (with +5V, +12V)
5V USB (for connecting the MCR Unit or the
Provided
iButton Unit)
Provided 24V powered USB
Provided 5V USB (4-pin connector)
Provided 5V USB (4-pin connector)
2 ports (Modular type, fitted with the drive circuit)
1 port (D-SUB 25-pin female)

HDD

Remarks

Locally purchased
Locally purchased
MIFST-71-2-QM is required
MIFST-71-2-QM is required
Adopts a graphic controller which
contains a chipset.
Supporting Wake-On-LAN function
Line Out x1, Mic In x 1
Keyboard and Mouse

KIT-71-COM-QM-R is required
KIT-71-COM-QM-R is required
RISER PC Board
RISER PC Board
ENGINE PC Board
RISER PC Board

DC 24V power supply for the
printer

Option (5x7 dot fluorescent display 20 digiys x 2 lines)

UPS battery

None

Supported OS
Power consumption
Dimension

Windows® XP, Windows® 2000 and Linux
250 W
295.0 mm (W) x 386.8 mm
359.9 mm (W) x 388.1 mm
(D) x 323.5 mm (H)
(D) x 371.4 mm (H)

Weight

11.5 Kg

TFTST-71-2A-QM-R (12.1-inch)
TFTST-71-5A-QM-R (15-inch)
LIUST-71-BAAK-QM-R is required
(NOTE 2)
None of the UPS battery can be
added.

12.5 Kg

NOTES:
1. The LVDS (2nd) port is used for connecting a second display which enables the dual display function. For the
dual display function, the option second display (TFTST-71-2A-QM-R orTFTST-71-5A-QM-R) and the KIT-71DSP1-QM-R are required.
2. For using the fluorescent type of the Remote Display, the LIU Stand (KIT-71-BASE-QM-R) is required.

1- 6

1. OUTLINE OF THE SYSTEM

EO10-12028
1.7 Basic Specifications

1.7.1

Engine Specifications

1.7.1.1 PC Functions
(1) CPU

Intel® Celeron® 2.0 GHz (400 MHz x 5): Socket-478
• Built-in secondary cache memory: Capacity 128KB

(2) BIOS-ROM

Flash ROM 1 MB
• Supports the shadow RAM BIOS function
• Programs below are stored in the system BIOS.
- System BIOS program
- VGA BIOS program
- NETWORK BOOT BIOS program
- BIOS DIAG program

(3) Memory (DRAM)

256MB DDR SDRAM with ECC
Configuration:
Two (2) slots are provided for the 2.5 V, 184-pin DIMM connector.
The 256-MB memory module is installed into either slot as standard.
Memory type:
PC2100/2700-compliant, unbuffered, ECC/non ECC type memory
module
Capacity:
Standard 256 MB/Max. 2 GB
Max. 1 GB/slot can be equipped.

(4) Chipset

Intel Corporation : 82852GME (North Bridge) + 82801DB (ICH4) (South Bridge) 2 chips
Basic Function of 82852GME (North Bridge):
• CPU Interface (400/533 MHz FSB controller)
• DDR DRAM controller (266/333 MHz DDR SDRAM Controller)
• Internal graphic controller
Basic Function of VT82801DB (ICH4) (South Bridge):
• Low pin count (LPC) interface
• 8259-based interrupt controller
• I/O APIC
• 8254-based timer controller
• PCI2.2 bus interface
• LAN controller
• USB1.1/2.0 host controller
• AC’97 interface
• SM bus
• IDE controller (ATA-33/66/100)
• Real Time Clock
• BIOS memory control firmware hub (FWH) I/F
• 8237-based DMA controller
• Power Management function

(5) Super I/O Chip

Equipped with SMSC’s LPC47M287
Basic Function:
• Controls the Keyboard, Mouse
• Controls the COM1, COM2 and LPT1
• FAN control
• Voltage monitor (+1.5V/2.5V/5V/12V/Vccp/Vbat/VTR/Vcc)

1- 7

1. OUTLINE OF THE SYSTEM

EO10-12028
1.7 Basic Specifications

(6) POS Gate Array

Equipped with the TEC POS Gate Array EC-B190
(connected to the South Bridge via LPC-ISA Bridge)
Basic Function:
• Controls Drawer 1 and Drawer 2
• Controls COM3 to COM6

(7) Keyboard Interface 8042 (Built in super I/O chip)
• Controls the PS/2 Keyboard (PC Keyboard or POS Keyboard) and the mouse.
• MINI-DIN 6-pin connector equipped on the POS terminal.

(8) Serial Interface

1

5

6

9

(9) Parallel Interface

13

1

25

14

COM1 and COM2 (Built in super I/O chip)
• PC standard COM1 and COM2 ports
• D-SUB 9-pin connector (male) equipped on the POS terminal
Pin
Signal
I/O
1
DCD (Data Carrier Detect)
I
2
RXD (Received Data)
I
3
TXD (Send Date)
O
4
DTR (Data Terminal Ready)
O
5
GND
P
6
DSR (Data Set Ready)
I
7
RTS (Request To send)
O
8
CTS (Clear To Send)
I
9
RI (Ring Indicator)
I
LPT1 (Bi-directional) (Built in the super I/O chip)
• PC standard Centronics printer port
• Selectable from Output only/Bi-directional/EPP/ECP by the BIOS setting
• D-SUB 25-pin connector (female) is equipped on the POS terminal.
PIN
Signal
I/O
PIN
Signal
I/O
1
/STROBE
O
14
/AFD
O
2
DATA0
I/O
15
/ERROR
I
3
DATA1
I/O
16
/INIT
O
4
DATA2
I/O
17
/SLIN
O
5
DATA3
I/O
18
GND
--6
DATA4
I/O
19
GND
--7
DATA5
I/O
20
GND
--8
DATA6
I/O
21
GND
--9
DATA7
I/O
22
GND
--10
/ACK
I
23
GND
--11
BUSY
I
24
GND
--12
PE
I
25
GND
--13
SLCT
I/O

(10) Real Time Clock and Lithium Battery
Primary battery
• RTC compatible with DS1287 and MC 146818A.
• The RTC has a battery-backed-up CMOS RAM with 128 bytes x 2 banks.
• The lithium battery is used for backing up the clock and the setup information.
• The clock is to be accurate within ± 1 minute and 30 seconds per month.
1- 8

1. OUTLINE OF THE SYSTEM

EO10-12028
1.7 Basic Specifications

(11) Interface on the RISER board
This interface is connected to the RISER board. The following I/Os are expanded
through the interface.
• USB x 1, Powered USB x 1 (USB2.0/1.1)
• AC’97
• COM5 and COM6
• Primary HDD
(12) Interface on the PCMCIA/DF Board
This interface is connected to the RISER board. The following I/Os are expanded
through the interface.
• PCMCIA
• CF (Secondary IDE)
(13) USB Interface, Powered USB Interface
Host controller which is contained in 82801DB (ICH4)
• Conforming to the Universal Hub Controller Interface (UHCI)
Conforming to the Enhanced Host Controller Interface (EHCI)
• The one USB host controller controls six USB2.0/1.1 ports.
• A USB port is provided on the ENGINE PC Board (USB4) and the RISER PC Board
(USB5) as standard.
• A Powered USB port (USB3) which supplies 24V to the RISER PC Board is available.
• Available under Windows2000, WindowsXP, and Linux.
• Powered USB should be connected while the system power is on.
Available current for USB ports
Voltage
Max.
Remarks
5V USB
A maximum of 0.5 A is available
for one port.
24V USB
A maximum of 2.0 A is available
Compliant with Powered USB
for one port.
(5 A peak/ Less than 2 seconds)
NOTE: The socket of USB3 port consists of a power supply connector (24V for
USB3) and a 5V USB connector. This USB connector can be used in the
same way as a general 5V USB connector.

5V USB Connector
Power Supply Connector
(14) Speaker

8 ohrms/0.5W
• A small speaker is provided on the Switch PC Board.
• The sound volume is adjustable with the speaker volume.

(15) HDD Interface

IDE interface (Primary/Secondary)
• IDE controller: 82801DB (ICH4)
• Conforming to PIO mode , DMA mode, and Ultra ATA/33/66/100
• One channel (Primary) is provided on the RISER PC Board and the other (Secondary)
for the Compact Flash (CF) is provided on the PCMCIA PC Board.
• A maximum of two 2.5-inch HDDs (master, slave) can be installed.
NOTE: For details, refer to the HDD specification manual published by HDD
manufacturer.

1- 9

1. OUTLINE OF THE SYSTEM

EO10-12028
1.7 Basic Specifications

(16) Internal graphic interface
1) RGB interface: Analog RGB
• VGA controller:
Graphic controller embedded with Intel 82852GME
• VIDEO memory:
Using system memory (according to the BIOS setting)
• Resolution & Maximum number of colors
OS
Linux
Windows
VIDEO memory
64 MB
64 MB
640 x 480 (16M)
Resolution
640 x 480 (16M)
800 x 600 (16M)
(Maximum number of
800 x 600 (16M)
1,024 x 768 (16M)
colors)
1,024 x 768 (16M)
1,152 x 864 (16M)
1,152 x 864 (16M)
1,280 x 1,024 (16M)
1,280 x 1,024 (16M)
1,600 x 1,200 (16M)
1,600 x 1,200 (16M)
• VGA BIOS ROM:
• Dual display:

5

1

15

11

Stored in system BIOS
The 852GME internal controller enables dual display
between the on-board RGB and the expandable LCD
interface (piggy board) under the OS such as
Windows®2000 and XP. Details conform to the device
driver settings. However, three screens cannot be
displayed at the same time.

• Connection with CRT: 15-pin VGA connector (female)
PIN
Signal
I/O
PIN
Signal
1
RED
O
9
NC
2
GREEN
O
10
GND
3
BLUE
O
11
NC
4
NC
NC
12
SPD
5
GND
P
13
HSYNC
6
AGND
P
14
VSYNC
7
AGND
P
15
SPCLK
8
AGND
P

I/O
NC
P
NC
I/O
O
O
I/O

2) Expansion LCD interface: expandable with the piggyback board
This interface is installed on the ENGINE PC board with the piggyback board, and it
converts the LCD interface signal sent from the ENGINE PC board to the LVDS
signal.
LVDS interface
• VGA controller:
Graphic controller embedded with Intel 82852GME
• VIDEO memory:
Using system memory (according to the BIOS setting)
• Resolution:
XGA (Max. 1024 x 768 dots depending on the TFT
display)
• Connection with ENGINE: Installed on the ENGINE PC board with the piggyback
board (TOSHIBA TEC original board).
• Touch panel control:
Connected from the LVDS interface to COM3 or COM4
on the ENGINE PC board.
• Speaker control:
Connected to the internal speaker signal.
• Connection with TFT:
TOSHIBA TEC original interface 26-pin connector with
lock.
Not compatible with the pins of the conventional
products.

1-10

1. OUTLINE OF THE SYSTEM

EO10-12028
1.7 Basic Specifications

• Signal: LVDS signal (The connector includes the touch panel control RS-232C
and speaker control signals.)
PIN
Signal
I/O
PIN
Signal
I/O
1
+5V
--14 TXOUT0O
2
TX0GND
--15 TXOUT0+
O
3
+5VC
--16 +12V
--4
TXOUT1O
17 TX1GND
--5
TXOUT1+
O
18 +12V
--6
SPKR
O
19 RXD
I
7
TXD
O
20 DTR
O
8
CTS
I
21 RTS
O
9
+12V
--22 TXOUT2O
10 TX2GND
--23 TXOUT2+
O
11 BLK
O
24 DSR
I
12 TXCLKO
25 TXCGND
--13 TXCLK+
O
26 GND
--(17) LAN Interface

Conforming to the IEEE802.3 10BASE-T/100BASE-TX Standard
• LAN controller:
VIA Technologies Inc. VT6105
• Interface:
PCI bus master interface
• Connector:
RJ-45 modular connector (with LED)
LED status
Type of LED (Color)
LNK/ACT (Green)

SPEED (Yellow)
LNK/ACT LED
(Green)

SPEED LED
(Yellow)

LED Status
Off
On
Blink
Off
On

1-11

Condition
A LAN link has not been established.
A LAN link has been established.
Frame being sent/received
Connected with 10BASE-T
Connected with 100BASE-TX

1. OUTLINE OF THE SYSTEM

EO10-12028
1.7 Basic Specifications

1.7.1.2 POS Functions
(1) Drawer interface
A maximum of two drawers containing the TOSHIBA TEC standard 24V drive circuit can be connected.
• 4-pin modular type x 2
• 4-pin type x 1
(Not used, Japan model only: when the option KIT-7000-PUSB-QM is installed.)
Connector specifications
4-pin modular type
Drawer Connector Type
PC Board
Remarks
Drive circuit contained on the drawer
Drawer 1 4-pin modular
Engine board
side
Drive circuit contained on the drawer
Drawer 2 4-pin modular
Engine board
side
(2) Serial interface

COM1 and COM2

COM1, COM2:
COM3, COM4:
COM5, COM6:

9-pin DSUB (male) as standard
9-pin DSUB (female) as standard.
9-pin DSUB (female) (option)

+5V and +12V can be supplied.
+5V and +12V can be supplied.

COM5 and COM6 are provided on the RISER PC board. When using COM5 or/and
COM6, the option KIT-71-COM-QM-R is required.
COM3 to COM6 do not have the RI and DCD signals.
COM3 to COM6

Power supply from the Serial Interface
Voltage
Current
5V
1A/port
12V
750mA/port

(3) Powered USB (Installed on the RISER board):
A Powered USB port which supplies 24V to the RISER PC Board is available.

1-12

1. OUTLINE OF THE SYSTEM

EO10-12028
1.7 Basic Specifications

1.7.2

Operating Display Specifications

1.7.2.1 12-inch model
12.1-inch color TFT
Display Size
Resolution
Max. number of colors
Adjustment Mechanism
LED
Touch
Panel

Power LED (Green)
HDD LED (Yellow)
Method
Resolution
Input method
Baud Rate

12.1-inch
Max. 800 x 600 dots
262K (262,144 colors)
Brightness Control
Tilt Angle: 0° to 90°
Lights at the power on time
Lights on having an access to the HDD or CF.
Analog Register Film
1024 x 1024 dots
Pushed by fingers
9600 bps fixed

1.7.2.2 15-inch model
Display Size
Resolution
Max. number of colors
Adjustment Mechanism
LED
Touch
Panel

Power LED (Green)
HDD LED (Yellow)
Method
Resolution
Input method
Baud Rate

15-inch color TFT
15-inch
Max. 1024 x 768 dots
262K (262,144 colors)
Brightness Control
Tilt Angle: 0° to 90°
Lights at the power on time
Lights on having an access to the HDD or CF.
Analog Register Film
1024 x 1024 dots
Pushed by fingers
9600 bps fixed

1-13

1. OUTLINE OF THE SYSTEM

EO10-12028
1.7 Basic Specifications

1.7.3 Operating Environment
Temperature

Relative humidity

Height above sea level

Operating:
Storage:
Transportation:
Operating:
Storage:
Transportation:
Operating:
Non-operating:

5 °C to 35 °C
-20 °C to 60 °C
-20 °C to 60 °C
10% to 80%RH
No condensation
10% to 90%RH
No condensation
10% to 90%RH
No condensation
-60 m to 3,000 m
-60 m to 12,000 m

1.7.4 Power Supply Specifications
Input voltage/
Consumption current
(with outlet)
Output voltage/ current

AC

90V to 264V

Voltage
+3.3V ±5%
+5V ±5%
+12V ±5%
-5V ±5%
-12V ±5%
+5VSB ±5%

Power cord

Power supply capacity

50/60 Hz

5.0A (115V) to 2.5A (230V)

Minimum current value (A)
0.3
2.0
0.2
0.0
0.0
0.0

Maximum current value (A)
16.0
25.0
15.0
0.3
0.8
2.0

ATX compliance: 20-pin connector, ATX12V, 4-pin connector,
A power cord is not enclosed with the product. Please prepare a power cord locally.
To prevent accidents such as electric shocks and malfunctions, connect the ground to
the ground terminal of the outlet.
In the United States of America, use the power cord described below:
Power cord
- UL listed, type SVT, 18/3AWG, rated minimum 125V, 10A
Attachment plug
- Moulded on type, parallel-blade grounding plug, NEMA5-15P configuration
- Moulded on type having standard IEC CE-22 female configuration
The power is shared by the PCI bus, expandable HDDs, USB devices, and other
option devices in the following range:
+24V
3A (Peak 10A)
+12V
2A
+5V
2A
NOTES:
1. Total consumption current of option devices connected to the POS terminal should
be within rated current of each voltage (+24V, +12V, +5V). If it exceeds the rated
current, the POS terminal may malfunction due to shortage of power supply.
2. The system should be constructed so that the total power consumption does not
exceed the power supply capacity (250W). As the CPU (Celeron 2.0GHz)
consumes a maximum of 72W, the power consumption of the option devices
should be within 178W in total.

1-14

1. OUTLINE OF THE SYSTEM

EO10-12028
1.7 Basic Specifications

When purchasing the power cord
Since the power cord set is not enclosed in this unit, please purchase an approved one that meets the following
standard from your authorized TOSHIBA TEC representative.
(As of September 2004)
Certification
mark

Certification
mark

Certification
mark

Country

Agency

VDE

Sweden

SEMKKO

Ireland

NSAI

Switzerland

SEV

CEBEC

Italy

IMQ

UK

ASTA

Canada

CSA

Japan

METI

UK

BSI

Denmark

DEMKO

Netherlands

KEMA

U.S.A.

UL

Finland

FEI

Norway

NEMKO

Europe

HAR

France

UTE

Spain

AEE

Country

Agency

SAA

Germany

Austria

OVE

Belgium

Country

Agency

Australia

Power Cord Instruction
1. For use with 100 – 125 Vac mains power supply, please select a power cord rated Min. 125V, 10A.
2. For use with 200 – 240 Vac mains power supply, please select a power cord rated Min. 250V.
3. Please select a power cord with the length of 4.5 m or less.
Country/Region
Power Cord
Rated (Min.)
Type

North America

Europe

United Kingdom

Australia

125V, 10A
SVT

250V
H05VV-F

250V
H05VV-F

No. 3/18AWG

3 x 0.75 mm2

3 x 0.75 mm2

3 x 0.75 mm2

250V, *1

250V, *1

250V
AS3191 approved,
Light or Ordinary Duty type

Conductor size
(Min.)
Plug Configuration
(locally approved
type)

250V, 10A
125V, 10A
Rated (Min.)
*1: Minimum 125% of the rated current of the product.

1-15

2. DETAILED INFORMATION

EO10-12028
2.1 Block Diagram

2. DETAILED INFORMATION
2.1 Block Diagram

: Option

Celeron 2.0GHz (mPGA478)

LCD I/F Board (Piggy)

DVO

FLASH-ROM
8 Mbit

Real Time Clock
(RTC)

BIU TFT

COM3 Header

BIU Touch Panel

LVDS

FIU TFT
COM4 Header

Basic Memory
Max. 1GB
Expanded Memory
Max. 1GB

DVO - LVDS Convert

FIU Touch Panel

VGA
PS/2 Keyboard I/F
PS/2 Mouse I/F
232C COM1

Parallel Port 1

232C COM2
USB#4
10/100BASE-/TX

EC-B190

232C COM3
232C COM4
Drawer 1
Drawer 2

ENGINE PC Board
HDD
HDD

IDE Primary

232C COM5
232C COM6

IDE Secondary

USB#5
24V P-USB#3
Av97
Codec
CF Card

Line OUT

RISER PC Board
Piezoelectric
Buzzer

PC Card

PC card
I/F

Mic IN

SPK VOL Control

Speaker

BEEP VOL Control
P-SW

SW PC Board
PCMCIA PC Board

Reset SW
MCR/i-Button

USB #1

2- 1

2. DETAILED INFORMATION

EO10-12028
2.2 Block Diagram (PC Board Level)

2.2

Block Diagram (PC Board Level)
80-pin

Intel Celeron 2.0GHz

1st LVDS
2 nd LVDS

LVDS

DVO

FSB400/533
DDR266/333
with ECC (up to 2GB)

LVDS

North Bridge
Intel 853GME

DVO
RGB

VGA

DDR DIMM0 (184-pin)
DDR DIMM1 (184-pin)

COM3 (Second LVDS Display)

COM1
COM2

LPC47M287
LPC
Super I/O

Parallel
PS/2 K/B

LPC

PS/2 Mouse
COM4 (First LVDS Display)

COM3
COM4
DRW1
DRW2

South
Bridge

Back Light
Back Light

Gate
Array
EC-B190

Intel
82801DB
ICH4

LAN
CNT

BIOS

USB#4

LAN

USB0 to 5

Power
&
Control

ENGINE PC Board

Secondary IDE

USB#1
Primary IDE

USB#5

RISER PC Board

P-USB#3

Line
OUT

AC97

COM5

Buzzer

COM6
24V OUT
BEEP VOL

SW

Speaker VOL
RESET
SPK
Power
PC Card

Mic IN

SW PC Board

PCMCIA
Controller

DC12/5/3.3V, 5VB

CF

PF

PCMCIA PC Board

ON CTRL

2- 2

Power
Supply

AC90 to 240V

2. DETAILED INFORMATION

EO10-12028
2.3 Block Diagram (Display Section)

2.3

Block Diagram (Display Section)
Inverter

Back Light

FPCNT PC Board
Touch Panel

from RISER PC Board

LVDS
Decoder

LED
input
LVDS
input

from LVDS

VOL PC Board
HDD LED (Yellow)
Power LED (Green)

Brightness Control

2- 3

LCD of LVDS

LCD of TTL input

2. DETAILED INFORMATION

EO10-12028
2.4 Detailed Information about PC Standard Functions

2.4

Detailed Information about PC Standard Functions

Memory Map
00000h
RAM 640KB
A0000h
VRAM (Graphic mode) 64KB
B0000h

Expansion for a
1024 x 768 dot-or-more
Graphic mode

B8000h
VRAM (Text mode) 32KB
C0000h
VGA BIOS 64KB
(Shadow RAM)
D0000h
SRAM

D4000h
Data area for USB emulations
D8000h

LAN Boot ROM (PXE)

UMB 64KB

E8000h
System ROM BIOS 64KB
(Shadow RAM)
100000h

Expanded Memory
2047MB (Max.)

80000000h

FFF00000h
System ROM BIOS 1MB

FFFFFFFFh

2- 4

2. DETAILED INFORMATION

EO10-12028
2.4 Detailed Information about PC Standard Functions

I/O Assignment
ADDRESS (hex)
0000-001F
0020-0021
0024-0025
0028-0029
002C-002D
002E-002F
0030-0031
0034-0035
0038-0039
003C-003D
0040-0043
004E-004F
0050-0053
0060
0061
0062
0063
0064
0065
0066
0067
0070-0077
0080-0091
0092
0093-009F
00A0-00A1
00A4-00A5
00A8-00A9
00AC-00AD
00B0-00B1
00B2-00B3
00B4-00B5
00B8-00B9
00BC-00BD
00C0-00DF
00F0-00FF
0170-0177
01F0-01F7
0CF9
03F8-03FF
02F8-02FF
03E8-03EF
0376
0378-037F
03B0-03BB
03C0-03DF
(03F0-03F5)
03F6
(03F7)
04D0-04D1
0110-0117
0CF8-0CFB
0CFC-0CFF
02E8-02EF
0128-012F
02F0-02F7
0146
0110-0117
0274-0277
0279
0E0,0100
0118-011F
0120-0127
0138-013F
0140,0142,0144
014A,014E
0152-015C
03F0-03F5
0400-047F
0480-04BB
0500-0517

PC/POS
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC

IC
ICH4
ICH4
ICH4
ICH4
ICH4
LPC47M287
ICH4
ICH4
ICH4
ICH4
ICH4
LPC47M287
ICH4
LPC47M287
ICH4
LPC47M287
ICH4
LPC47M287
ICH4
LPC47M287
ICH4
ICH4

DMA Controller
Reset Generator
DMA Controller
Interrupt Controller
Interrupt Controller
Interrupt Controller
Interrupt Controller
Interrupt Controller
APM
Interrupt Controller
Interrupt Controller
Interrupt Controller
DMA Controller
Numeric Data Processor
Secondary IDE
Primary IDE
Reset Control
COM1 (male)
COM2 (male)
COM3 (female)
Secondary IDE
Parallel Port
82852GME Graphics Controller
82852GME Graphics Controller
FDC
Primary IDE
FDC
Interrupt Controller
Switch status (COM7 bit0)
PCI Configuration address register
PCI Configuration data register
COM4 (female)
COM5 (female)
COM6 (female)

PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
POS
PC
PC
PC
PC
PC
PC
PC
PC
POS
PC
PC
POS
POS
POS

ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
ICH4
LPC47M287)
LPC47M287)
EC-B190
ICH4
LPC47M287
852GME
852GME
LPC47M287
ICH4
LPC47M287
ICH4
EC-B190
ICH4
ICH4
EC-B190
EC-B190
EC-B190

Drawer

POS

EC-B190

UPS (COM7)

POS

EC-B190

ISA PNP Read Data Port
ISA PNP Read Data Port
System Reserve
System Reserve
System Reserve
System Reserve
System Reserve
System Reserve
System Reserve
System Reserve
Power Management
ICH4 GPIO
SMBus

PC
PC
POS
POS
POS
POS
POS
POS
POS
POS
PC
PC
PC

ICH4
ICH4
EC-B190
EC-B190
EC-B190
EC-B190
EC-B190
EC-B190
EC-B190
EC-B190
ICH4
ICH4
ICH4

Characterization
DMA Controller
Interrupt Controller
Interrupt Controller
Interrupt Controller
Interrupt Controller
LPC SIO
Interrupt Controller
Interrupt Controller
Interrupt Controller
Interrupt Controller
Timer/Counter
LPC SIO
Timer/Counter
Keyboard Controller
NMI Controller
Microcontroller (LPC)
NMI Controller
Keyboard Controller
NMI Controller
Microcontroller (LPC)
NMI Controller
System CMOS/RTC

2- 5

Remarks

Not used
Not used

(Optional)
(Optional)

Not used

2. DETAILED INFORMATION

EO10-12028
2.4 Detailed Information about PC Standard Functions

Interruption Assignment
Interrupt Level

Factor

Win2000

OS
WinXP

Linux

NMI
IRQ0

Timer

Å

Å

Å

IRQ1

Keyboard

Å

Å

Å

IRQ2

8259 (Interrupt Controller)

Å

Å

Å

IRQ3

COM2

Å

Å

Å

IRQ4

COM1

Å

Å

Å

IRQ5

COM6/COM7 (UPS) or
PCI/USB

Å

Å

Å

IRQ6

FDD

Å

Å

Å

IRQ7

COM5/ (LPT)

Å

Å

Å

IRQ8

RTC

Å

Å

Å

IRQ9

ACPI or PCI/USB

ACPI

ACPI

ACPI

IRQ10

COM3

Å

Å

Å

IRQ11

COM4

Å

Å

Å

IRQ12

Mouse

Å

Å

Å

IRQ13

CoProcessor

Å

Å

Å

IRQ14

HDD (Primary)

Å

Å

Å

IRQ15

HDD (Secondary)

Å

Å

Å

PCI/USB

PCI/USB

PCI/USB

PCI/USB

APIC
IRQ16-23

Interrupt switch between COM6 and COM7
Type

COM6

I/O Address

Connection
I/O

2F0-2F7h

Connector
BIOS Setting
9-pin D-Sub
female
IRQ5

COM7

110-117h

UPS

Internal wiring

2- 6