for4 sec1 6.pdf


Aperçu du fichier PDF for4-sec1-6.pdf - page 3/45

Page 1 2 34545



Aperçu texte


General Description
COOLING

1. General Description
A: SPECIFICATION
Model
Cooling system

2(US qt, Imp qt)

Total engine coolant capacity

Type
Discharge performance I

Discharge performance II
Water pump
Discharge performance III

Thermostat

Discharge
Pump speed — Discharge
pressure
Engine coolant temperature
Discharge
Pump speed — Discharge
pressure
Engine coolant temperature
Discharge
Pump speed — Discharge
pressure
Engine coolant temperature

Impeller diameter
Number of impeller vanes
Pump pulley diameter
Standard
Clearance between
impeller and case
Limit
“Thrust” runout of impeller end
Type
Starts to open
Fully opened
Valve lift
Valve bore

Non-turbo
Turbo
Electric fan+Forced engine coolant circulation system
2.0L with ATF warmer:
Approx. 6.9 (7.29, 6.07)
2.0L AT:
AT:
Approx. 6.5 (6.87, 5.72)
Approx. 7.3 (7.71, 6.42)
2.0L MT:
MT with oil cooler:
Approx. 6.6 (6.98, 5.81)
Approx. 7.3 (7.71, 6.42)
2.5L AT:
MT without oil cooler:
Approx. 6.8 (7.19, 5.98)
Approx. 7.4 (7.82, 6.51)
2.5L MT:
Approx. 6.9 (7.29, 6.07)
Centrifugal impeller type
202 (5.3 US gal, 4.4 Imp gal)/min.
760 rpm — 2.9 kPa (0.3 mAq)
85°C (185°F)
1002 (26.4 US gal, 22.0 Imp gal)/min.
3,000 rpm — 49.0 kPa (5.0 mAq)
85°C (185°F)
2002 (52.8 US gal, 44.0 Imp gal)/min.
6,000 rpm — 225.4 kPa (23.0 mAq)
85°C (185°F)
76 mm (2.99 in)
8
60 mm (2.36 in)
0.5 — 0.7 mm (0.020 — 0.028 in)
1.0 mm (0.039 in)
0.5 mm (0.020 in)
Wax pellet type
80 — 84°C (176 — 183°F)
76 — 80°C (169 — 176°F)
95°C (203°F)
91°C (196°F)
9.0 mm (0.354 in) or more
35 mm (1.38 in)

Main fan

70 W

Motor

2.0L AT (K4★1) : 70 W
2.0L AT (EC, EK★1) :
120 W
2.0 L MT: 70 W
2.5 L: 120 W

2.0L AT (K4★1) : 70 W
2.0L AT (EC, EK★1) :
70 W
120 W
2.0 L MT: 70 W
2.5 L: 120 W
320 mm (11.81 in)×5 (main fan)
320 mm (11.81 in)×7 (sub fan)

Radiator fan
Sub fan

Fan diameter×Blade

CO(H4SO)-2