Fichier PDF

Partage, hébergement, conversion et archivage facile de documents au format PDF

Partager un fichier Mes fichiers Convertir un fichier Boite à outils Recherche Aide Contact



How to change COM port setting .pdf



Nom original: How to change COM port setting.pdf
Auteur: epson_chiang

Ce document au format PDF 1.5 a été généré par Microsoft® Word 2010, et a été envoyé sur fichier-pdf.fr le 06/12/2016 à 16:11, depuis l'adresse IP 41.249.x.x. La présente page de téléchargement du fichier a été vue 274 fois.
Taille du document: 303 Ko (10 pages).
Confidentialité: fichier public




Télécharger le fichier (PDF)









Aperçu du document


How to change COM por t
setting
1. Change port settings
1.1. Double-click “UartSetup.exe” and then click “Next”.
1.2. Right-Click first UART adapter and then click “properties”.

1.3. Change to “Ports Configuration” and select Port1 in the list and then click
“Port Setting”

1.4. Un-check “Auto Enumerating COM Number” and Select “COM5” in the
drop list and then click “OK”.

1.5. Change to “Ports Configuration” and select Port2 in the list and then click
“Port Setting”

1.6. Un-check “Auto Enumerating COM Number” and Select “COM6” in the
drop list and then click “OK”.

1.7. Change to “Ports Configuration” and select Port3 in the list and then click
“Port Setting”

1.8. Un-check “Auto Enumerating COM Number” and Select “COM7” in the
drop list and then click “OK”

1.9. Change to “Ports Configuration” and select Port4 in the list and then click
“Port Setting”

1.10. Un-check “Auto Enumerating COM Number” and Select “COM8” in the
drop list and then click “OK”

1.11. Change to “Ports Configuration” and select Port5 in the list and then click
“Port Setting”

1.12. Un-check “Auto Enumerating COM Number” and Select “COM3” in the
drop list and then click “OK”

1.13. Change to “Ports Configuration” and select Port6 in the list and then click
“Port Setting”

1.14. Un-check “Auto Enumerating COM Number” and Select “COM4” in the
drop list and then click “OK”

1.15. Change to “Ports Configuration” and select Port7 in the list and then click
“Port Setting”

1.16. Un-check “Auto Enumerating COM Number” and Select “COM1” in the
drop list and then click “OK”

1.17. Change to “Ports Configuration” and select Port8 in the list and then click
“Port Setting”

1.18. Un-check “Auto Enumerating COM Number” and Select “COM2” in the
drop list and then click “OK”

1.19. After configuration, the settings should be as follows:


Documents similaires


Fichier PDF how to change com port setting
Fichier PDF eye spy 3ds max eye tutorial by cymae
Fichier PDF stripe without link pdf  1
Fichier PDF howto install
Fichier PDF 3dsmax hard surface unwrapping
Fichier PDF px3 2


Sur le même sujet..