Carenado GNS530 Users Guide .pdf


Nom original: Carenado GNS530 Users Guide.pdfAuteur: Don

Ce document au format PDF 1.5 a été généré par Microsoft® Word 2010, et a été envoyé sur fichier-pdf.fr le 09/04/2017 à 22:35, depuis l'adresse IP 77.84.x.x. La présente page de téléchargement du fichier a été vue 401 fois.
Taille du document: 259 Ko (2 pages).
Confidentialité: fichier public


Aperçu du document


GARMIN GNS530

Com Active/Standby Frequency Switch

Nav Active/Standby
Frequency Switch

Zoom In/Out
Button

Com Active/Standby Frequencies

Nav Active/Standby
Frequencies

On/Off Button

Direct To
Button

Nav1 Ident

Menu
Button

Nav1 Radial
Nav1 Distance

Clear
Button

GPS Waypoint
Information Bar area

Enter
Button

Com/Nav Switch

Change Pages Groups
(NAV-WPT-NRST)
/Move Cursor

Increase/Decrease
Frequency (MHz)
Increase/Decrease
Frequency (KHz)

1.
2.
3.
4.
5.
6.
7.
8.
9.

NAV/GPS
Switch

Message
Button

Flight Plan
Button

Terrain
Button

Procedures
Button

Cursor On/Off
Change Pages
Within Page Groups

The On/Off button turns the unit on and off.
The top number in each radio box correspond to the active frequency, the bottom number correspond to the
standby frequency.
The Com and Nav Active/Standby Frequency switch toggles the active frequency to standby and vice versa.
Nav1 Ident readout is the 3 letter code of the Nav1 beacon tuned in the Nav1 frequency.
Nav1 Radial is the radial degrees from the Nav1 beacon.
Nav1 Distance is the distance from the Nav1 beacon.
The Com/Nav switch is used to toggle between the Com and Nav radios.
The CDI switch (NAV/GPS switch) toggles between GPS and Nav1 navigation modes.
The CDI, at the bottom of the screen, shows course deviation information in either Nav 1 or GPS navigation
modes. In the Nav 1 mode, the CDI works exactly like the standard CDI display found on most aircraft. The
deflection distance of the CDI needle corresponds to 1 mile on each side of the desired track in the Nav 1
mode and it corresponds to a 5 miles distance on each side when tracking a waypoint in the GPS mode.

10. All other buttons and their functions are the same as in the FSX default GPS500 unit and are described in the
help section of the simulator. Please refer to this section for information on the functions.

GPS Waypoint Information Bar

GPS Waypoint
Information Bar

Click on the red area of the above picture to make the GPS Waypoint Information Bar appear/disappear. It
could be clicked anytime you want.
The digital display of GPS waypoint information shows values only for GPS waypoints. If no waypoint is set in the GPS,
the readout will display nothing.


Aperçu du document Carenado GNS530 Users Guide.pdf - page 1/2

Aperçu du document Carenado GNS530 Users Guide.pdf - page 2/2




Télécharger le fichier (PDF)


Carenado GNS530 Users Guide.pdf (PDF, 259 Ko)

Télécharger
Formats alternatifs: ZIP



Documents similaires


carenado gns530 users guide
notice utilisation converti
uv 5r menus
magnum 1012 om
seaiq transferring your opencpn charts to seaiq open
checlist f18c

Sur le même sujet..