Recherche PDF


Cet outil permet de trouver un fichier parmi les documents publics partagés par les utilisateurs de Fichier-PDF.fr.
Dernière mise à jour de la base de données: 30 octobre à 04:46 - Environ 390000 fichiers indexés.

Afficher résultats par page

Réponses pour «tensile»:



Total: 35 résultats - 0.112 secondes

essai de traction 100%

Effects of annealing on aluminum alloy Quentin Battesti Laboratoire de matériaux Arts et Métiers ParisTech, 8 Boulevard Louis XIV, 59046 Lille, France Available 11 December 2016 Abstract Uniaxial tensile tests were carried out on two different samples of aluminum.

https://www.fichier-pdf.fr/2016/04/03/essai-de-traction/

03/04/2016 www.fichier-pdf.fr

BCIRA Vanadium in cast irons 97%

In grey irons-Vanadium contents up to about 0.5 per cent are very effective for increasing the tensile strength-an increase of 0.

https://www.fichier-pdf.fr/2013/02/23/bcira-vanadium-in-cast-irons/

23/02/2013 www.fichier-pdf.fr

BCIRA copper cast iron 92%

In tensile sttength required but for general guidance:

https://www.fichier-pdf.fr/2013/02/24/bcira-copper-cast-iron/

24/02/2013 www.fichier-pdf.fr

bielleF1hond 91%

1 Model of diffusion bonding process Development of Hollow Titanium Connecting Rod Developed (hollow) Rolled plate (t19) Blanking (water Jet) T-joint piece Diffusion bonded tensile test piece 1200 60 1000 50 800 40 600 30 400 20 200 10 0 Hot forging 0.2%YS-T 0.2%YS-L UTS-T UTS-L EL-T EL-L RA-T RA-L 0 DB-Rt 1.6 DB-Rt 6.3 • 0.2%YS :

https://www.fichier-pdf.fr/2014/12/31/biellef1hond/

31/12/2014 www.fichier-pdf.fr

Export katalogus 201801 25-52 press 87%

Due to this technology and PE fiber are ensure the precize and maximum tensile for the lines.

https://www.fichier-pdf.fr/2018/02/09/export-katalogus-201801-25-52-press/

09/02/2018 www.fichier-pdf.fr

Caleçons 30 gr 110115 V3 82%

D2 Grammage Epaisseur Résistance sens machine Résistance sens travers Allongement sens machine Allongement sens travers Norme Unité WSP 130.1 (05) gr./m WSP 120.6 (05) mm WSP 110.4 (05) N/5cm WSP 110.4 (05) N/5cm WSP 110.4 (05) N/5cm WSP 110.4 (05) N/5cm 30 0,28 66 59 74 82 Test method Unit Value 2 Valeur Grammage Thckness Tensile stength at break MD Tensile stength at break CD Elongation at break MD Elongation at break CD Mechanicals characteristics 30gr.

https://www.fichier-pdf.fr/2011/06/26/calecons-30-gr-110115-v3/

26/06/2011 www.fichier-pdf.fr

DW200 Dewal 82%

Its tensile strength is approximately 25% higher, and the elongation is approximately 60% higher than for homopolymer PTFE.

https://www.fichier-pdf.fr/2014/07/21/dw200-dewal/

21/07/2014 www.fichier-pdf.fr

Houston Universal Test Machine 82%

With the TestResources unique modular design, the 100 Series performs quasistatic tests including tensile, compression, peel, tear, shear, friction, creep, stress relaxation and cyclic.

https://www.fichier-pdf.fr/2014/09/18/houston-universal-test-machine/

18/09/2014 www.fichier-pdf.fr

1. LuVi-L Brochure(ENG) 2016 Mar 81%

Magnified image of PMC Wedges Advanges of PMC(Press Mold Cutting) Wedge 1 No heat treatment of PDO Maintaining properties of PDO 2 6~8 Wedges per 1cm Strong traction force 3 (Mirror type 180° in wedges Bi-Directional) 180° twin Wdeges Minimize Dimple 4 Constant Wedges by cutting using a specially designed Whole Blade Strong and even tensile strength Tensile Strength Comparison :

https://www.fichier-pdf.fr/2016/06/29/1-luvi-l-brochure-eng-2016-mar/

29/06/2016 www.fichier-pdf.fr

pdf CR 0939127-fiche 2-cloture-s equiper pour trav moins 71%

• fil galva « high tensile » Crapal Optimum diamètre 2,5 mm ..... 50 ohms • fil galva « high tensile » Crapal 4 diamètre 1,6 mm .....................100 ohms • fil électroplastique Top Line Oviflex 9 .....................................................120 ohms • fil électroplastique 3 conducteurs inox ..........................................10 000 ohms MINISTÈRE DE L’ALIMENTATION DE L’AGRICULTURE ET DE LA PÊCHE MINISTÈRE DE L’ALIMENTATION DE L’AGRICULTURE ET DE LA PÊCHE Pub 000939127 - ISBN 978-2-84148-785-1 Le choix du conducteur électrique

https://www.fichier-pdf.fr/2016/12/01/pdf-cr-0939127-fiche-2-cloture-s-equiper-pour-trav-moins/

01/12/2016 www.fichier-pdf.fr

CALFILMGF 68%

TECHNICAL DATA SHEET CALFILM GF PROPERTIES UNIT METHOD VALUES Backing thickness mm ASTM D1000 0,051 Total thickness mm ASTM D1000 0,085 Width mm / 900 DIMENSIONAL PHYSICAL - MECHANICAL Tensile strength Elongation at break 180° Peel Adhesion (25°C) N/mm2 % ISO 12086 ISO 527 ISO 12086 ISO 527 ≥ 50 ≥ 80 N/cm ASTM D1000 3 °C / - 73 / + 260 KV/mm ASTM D149 ≥ 20 THERMAL Service Temperature (min - max) ELECTRICAL Dielectric strength (specimen 0,5 mm thick) CD=Cross Direction The data we are herewith providing are all based on laboratory testing and are proposed to technical designers as possible and useful advice.

https://www.fichier-pdf.fr/2014/06/23/calfilmgf/

23/06/2014 www.fichier-pdf.fr

CV 2017 - Guillaume PETIT ENG 61%

renovation of a biaxial tensile test site for the study of the mechanical behaviour of elastomer elements.

https://www.fichier-pdf.fr/2017/11/25/cv-2017-guillaume-petit-eng/

25/11/2017 www.fichier-pdf.fr

Rapidkut Color Coded Ring Taps Flyer Lemieux 60%

Sale Price Price ER80Y4003050 20.09 12.05 ER80Y4003560 20.09 12.05 ER80Y4004070 20.09 12.05 ER80Y4005080 20.09 12.05 ER80Y4006100 20.09 12.05 ER80Y4007100 31.10 18.66 ER80Y4008100 31.10 18.66 ER80Y4008125 31.10 18.66 ER80Y4010125 46.39 27.83 ER80Y4010150 46.39 27.83 ER80Y4012125 50.84 30.50 ER80Y4012175 50.84 30.50 ER80Y4014150 64.19 38.51 ER80Y4014200 64.19 38.51 ER80Y4016150 81.62 48.97 ER80Y4016200 81.62 48.97 ER80Y4018150 118.16 70.90 ER80Y4018250 118.16 70.90 ER80Y4020150 139.19 83.51 ER80Y4020250 139.19 83.51 ER80Y4022150 150.64 90.38 ER80Y4022250 150.64 90.38 ER80Y4024300 161.94 97.16 3 7/15/20 1:53 PM High Performance Spiral Point Taps High Performance Spiral Flute Taps Plug Style • High Tensile • Red Band Semi-Bottoming Style • High Tensile • Red Band Red Ring - Powder Metallurgy HSS For high tensile materials such as:

https://www.fichier-pdf.fr/2020/08/26/rapidkut-color-coded-ring-taps-flyerlemieux/

26/08/2020 www.fichier-pdf.fr

Manufacturer Of Industrial Coatings 59%

FLOSIL Group operates with diversified product range of Industrial Gaskets, Ring joints, Monolithic Insulation joints, High tensile Fasteners, Hammer unions etc.

https://www.fichier-pdf.fr/2017/03/27/manufacturer-of-industrial-coatings/

27/03/2017 www.fichier-pdf.fr

Brochure Quardian EN 59%

The different proposed combinations of hardness and tensile strength ensure that you will always find the Quardian® adapted to your desired protection.

https://www.fichier-pdf.fr/2016/07/11/brochure-quardian-en/

11/07/2016 www.fichier-pdf.fr

new beetle cabriolet ssp 281 57%

Targeted reinforcements, such as high tensile bars in the A and B pillars, doors and in the floor, provide optional response in crash situations.

https://www.fichier-pdf.fr/2014/07/06/new-beetle-cabriolet-ssp-281/

06/07/2014 www.fichier-pdf.fr

68MetalWork416 426 57%

140,000 psi tensile strength, Rc 30-36.

https://www.fichier-pdf.fr/2015/10/29/68metalwork416-426/

29/10/2015 www.fichier-pdf.fr

Portfolio M.CETIN 57%

Istanbul Bibliothéque du quartier Unkapani Vefa Lisesi Otoparki - Unkapani - Istanbul 9 ) Structures tendues de membrane - tensile 10 ) Extension d’une ferme pédagogique Centre des technologies agronomiques, Modave 11) Une école à bras ouverts Quartier de Flémalle , Liège Une petite gare dans le quartier de Vennes avec les fonctions utilitaires d’une gare :

https://www.fichier-pdf.fr/2017/11/09/portfolio-m-cetin/

09/11/2017 www.fichier-pdf.fr

Etudes-des-plaques-trouées 51%

(1972) - Effect of tensile stress gradient on brittle fracture initiation.

https://www.fichier-pdf.fr/2015/04/25/etudes-des-plaques-trouees/

25/04/2015 www.fichier-pdf.fr

Aurora Geoengineering Final Report flight science The University Of Calgary 46%

The pipe system’s high operating pressures and tensile strength requirments bring the feasibility of this system into question.

https://www.fichier-pdf.fr/2016/06/15/aurora-geoengineering-final-report-flight-science-the-university-of-calgary/

15/06/2016 www.fichier-pdf.fr

Katalog Silicone 2009 01 45%

- clean and precise dosage excellent flowing characteristics, syringeable high elasticity and dimensional stability great tensile strength high detail reproduction - homogeneous bonding to VISKOFLEX final hardness approx.

https://www.fichier-pdf.fr/2014/02/10/katalog-silicone-2009-01/

10/02/2014 www.fichier-pdf.fr

PARALYSES 43%

We collected EMG, joint angles, and tensile force data at 2000 Hz using a 24-channel hard-wired AD board and custom-written acquisition software (LabView, National Instruments).

https://www.fichier-pdf.fr/2014/04/08/paralyses/

08/04/2014 www.fichier-pdf.fr

Communiqué Gersed - colloque Imagine - 9.02.18 40%

(…) Since the mitral valve relies upon collagen for its tensile strength, and myxomatous MVP is characterized by disruption of the collagen layer with expansion of glycosaminoglycans within the middle layer of the valve [Delling and Vasan, 2014], it is reasonable to still consider MVP as a potential clue for hEDS, but the true clinical significance is not yet known.

https://www.fichier-pdf.fr/2018/03/03/communique-gersed-colloque-imagine-9-02-18/

03/03/2018 www.fichier-pdf.fr

n9000a 39%

at 260ºC) Moisture Absorption Specific Gravity Thermal Conductivity Coefficient of Thermal Expansion (CTE) X Y Z Flammability Df 0.0022 0.0023 0.0024 0.0025 0.0030 0.0030 0.0030 0.0030 Ordering Information PIM Formulation Availability Pressure Cooker-60 min then solder dip @288°C until failure (max 10 min) Dielectric Breakdown Volume Resistivity Surface Resistivity Arc Resistance Flexural Strength Lengthwise Tensile Strength (warp/fill) Copper Peel Strength - 35 µm (1 oz) Modulus (warp) Moisture Absorption Specific Gravity Thermal Conductivity Coefficient of Thermal Expansion (CTE) X Y Z Flammability Poisson’s Ratio (warp/fill) Dissipation Factor at 10 GHz (Df) Dielectric Constant at 10 GHz (Dk) Typical Parameter IPC-TM-650, 2.4.24 IPC-TM-650, 2.3.10 ASTM D3039 ASTM E1461 IPC-TM-650, 2.6.16 (modified) IPC-TM-650, 2.5.6 IPC-TM-650, 2.5.17.1 IPC-TM-650, 2.5.17.1 IPC-TM-650, 2.5.1 IPC-TM-650, 2.4.4.0 ASTM D3039 IPC-TM-650, 2.4.8 ASTM D3039 IPC-TM-650, 2.6.2.1 Test Method IPC-TM-650, 2.5.5.5 IPC-TM-650, 2.5.5.5 NL SERIES 25 ppm / ºC 35 ppm / ºC 320 ppm / ºC V-0 0.180 / 0.221 Product Dk NL9294 2.94±.05 NL9300 3.00±.05 NL9320 3.20±.05 NL9350 3.50±.05 >50kV 6.1x107 M - cm 4.4x106 M - cm 215 sec.

https://www.fichier-pdf.fr/2014/07/21/n9000a/

21/07/2014 www.fichier-pdf.fr