SI Alpine TS 10W40 GB en R 1,01 .pdf



Nom original: SI_Alpine TS 10W40_GB-en-R-1,01.pdf
Titre: EG-SDB

Ce document au format PDF 1.3 a été généré par Crystal Reports / Powered By Crystal, et a été envoyé sur fichier-pdf.fr le 29/03/2018 à 03:20, depuis l'adresse IP 41.142.x.x. La présente page de téléchargement du fichier a été vue 210 fois.
Taille du document: 349 Ko (7 pages).
Confidentialité: fichier public


Aperçu du document


Mitan Mineralöl GmbH

Safety Data Sheet
according to Regulation (EC) No 1907/2006

Alpine TS 10W40
Print date: 24.08.2017

Page 1 of 7

Product code: MIT0005

SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Alpine TS 10W40
1.2. Relevant identified uses of the substance or mixture and uses advised against
1.3. Details of the supplier of the safety data sheet
Company name:
Mitan Mineralöl GmbH
Street:
Industriestraße 8
Place:
D-49577 Ankum

Telephone:
e-mail:
e-mail (Contact person):
Internet:
1.4. Emergency telephone
number:

+49 (0)5462/7470-50
info@mitan-oil.de
sicherheitsdatenblatt@mitan-oil.de
www.mitan-oil.de

Telefax: +49 (0)5462/7470-33

Giftinformationszentrum Nord (Göttingen)
+49 (0)551/19240

SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Regulation (EC) No. 1272/2008
This mixture is not classified as hazardous according to Regulation (EC) No. 1272/2008.
2.2. Label elements
Regulation (EC) No. 1272/2008
Special labelling of certain mixtures
EUH210
Safety data sheet available on request.
2.3. Other hazards
No information available.

SECTION 3: Composition/information on ingredients
3.2. Mixtures
Chemical characterization
Preparation of base oils and additives.

SECTION 4: First aid measures
4.1. Description of first aid measures
General information
When in doubt or if symptoms are observed, get medical advice.
After inhalation
Remove casualty to fresh air and keep warm and at rest. In case of accident or unwellness, seek medical
advice immediately (show directions for use or safety data sheet if possible).
After contact with skin
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated
clothing immediately. In case of skin irritation, consult a physician.
After contact with eyes
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time , then consult an
ophthalmologist immediately.
After ingestion
Observe risk of aspiration if vomiting occurs. Rinse mouth immediately and drink plenty of water. Induce
vomiting when the affected person is not unconscious . Medical treatment necessary.
Revision No: 1,01

GB - EN

Revision date: 14.08.2017

Mitan Mineralöl GmbH

Safety Data Sheet
according to Regulation (EC) No 1907/2006

Alpine TS 10W40
Print date: 24.08.2017

Page 2 of 7

Product code: MIT0005

4.2. Most important symptoms and effects, both acute and delayed
No information available.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.

SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media
Carbon dioxide (CO2). Foam. Dry extinguishing powder. Use water spray jet to protect personnel and to cool
endangered containers.
Unsuitable extinguishing media
High power water jet.
5.2. Special hazards arising from the substance or mixture
In case of fire may be liberated: Nitrogen oxides (NOx) Carbon monoxide.
5.3. Advice for firefighters
In case of fire: Wear self-contained breathing apparatus. Full protection suit Collect contaminated fire
extinguishing water separately. Do not allow entering drains or surface water.
Additional information
Suppress gases/vapours/mists with water spray jet. Collect contaminated fire extinguishing water separately.
Do not allow entering drains or surface water. Fire class B

SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Provide adequate ventilation. Do not breathe gas/fumes/vapour/spray. Avoid contact with skin, eyes and
clothes. Use personal protection equipment. Keep away from sources of ignition. - No smoking. Avoid contact
with skin and eyes. Conditions to avoid Inhalation Do not put any product-impregnated cleaning rags into your
trouser pockets. Special danger of slipping by leaking/spilling product.
6.2. Environmental precautions
Do not allow to enter into surface water or drains. Prevent spread over a wide area (e.g. by containment or oil
barriers). If product enters soil, it will be mobile and may contaminate groundwater.
6.3. Methods and material for containment and cleaning up
Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Treat the
recovered material as prescribed in the section on waste disposal.
6.4. Reference to other sections
Safe handling: see section 7
Personal protection equipment: see section 8
Disposal: see section 13

SECTION 7: Handling and storage
7.1. Precautions for safe handling
Advice on safe handling
If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe
gas/fumes/vapour/spray. Avoid contact with skin and eyes. Keep away from sources of ignition. - No smoking.
Wash hands before breaks and after work.
Further information on handling
Do not put any product-impregnated cleaning rags into your trouser pockets. The formation of combustible
vapours is possible at temperatures above: Flash point
7.2. Conditions for safe storage, including any incompatibilities

Revision No: 1,01

GB - EN

Revision date: 14.08.2017

Mitan Mineralöl GmbH

Safety Data Sheet
according to Regulation (EC) No 1907/2006

Alpine TS 10W40
Print date: 24.08.2017

Page 3 of 7

Product code: MIT0005

Requirements for storage rooms and vessels
Keep container tightly closed. Keep locked up. Store in a place accessible by authorized persons only. Provide
adequate ventilation as well as local exhaustion at critical locations.
Advice on storage compatibility
No special measures are necessary.
Further information on storage conditions
Protect from moisture. Keep in a cool place. Keep only in the original container at a temperature not exceeding
50 °C (to be specified by the manufacturer).

SECTION 8: Exposure controls/personal protection
8.1. Control parameters
8.2. Exposure controls

Appropriate engineering controls
If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe
gas/fumes/vapour/spray. Provide adequate ventilation as well as local exhaustion at critical locations.
Protective and hygiene measures
Remove contaminated, saturated clothing immediately. Draw up and observe skin protection programme.
Wash hands and face before breaks and after work and take a shower if necessary . When using do not eat or
drink.
Eye/face protection
Suitable eye protection: goggles. DIN EN 166
Hand protection
When handling with chemical substances, protective gloves must be worn with the CE-label including the four
control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the
specific working place concentration and quantity of hazardous substances. For special purposes, it is
recommended to check the resistance to chemicals of the protective gloves mentioned above together with the
supplier of these gloves. DIN EN 374
Skin protection
Wear suitable protective clothing. DIN EN 344
Respiratory protection

Typ: A-P2

SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties

Physical state:
Colour:
Odour:

liquid
yellow
characteristic
Test method

pH-Value:

not determined

Changes in the physical state
Melting point:

not determined
-33 °C ISO 3016

Pour point:
Flash point:
Revision No: 1,01

210 °C DIN ISO 2592
GB - EN

Revision date: 14.08.2017

Mitan Mineralöl GmbH

Safety Data Sheet
according to Regulation (EC) No 1907/2006

Alpine TS 10W40
Print date: 24.08.2017

Page 4 of 7

Product code: MIT0005

Flammability
Solid:

not applicable
not applicable

Gas:

Explosive properties
Product is not explosive. However, formation of explosive air/vapour mixtures are possible.

Lower explosion limits:
Upper explosion limits:

0,6 vol. %
6,5 vol. %

Auto-ignition temperature
Solid:
Gas:

not applicable
not applicable

Decomposition temperature:

not determined

Oxidizing properties
Not oxidizing.

Vapour pressure:

not determined

Density (at 20 °C):

0,862 g/cm³ DIN 51757

Water solubility:

insoluble

Solubility in other solvents
not determined

Partition coefficient:

not determined

Vapour density:

not determined

Evaporation rate:

not determined

9.2. Other information

Solid content:

not determined

SECTION 10: Stability and reactivity
10.1. Reactivity
No hazardous reaction when handled and stored according to provisions.
10.2. Chemical stability

The product is stable under storage at normal ambient temperatures.
10.3. Possibility of hazardous reactions

The formation of combustible vapours is possible at temperatures above: Flash point
10.4. Conditions to avoid
Oxidising agent, strong
10.5. Incompatible materials
No information available.
10.6. Hazardous decomposition products
No known hazardous decomposition products.

SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity
Based on available data, the classification criteria are not met.
Irritation and corrosivity
Based on available data, the classification criteria are not met.
Revision No: 1,01

GB - EN

Revision date: 14.08.2017

Mitan Mineralöl GmbH

Safety Data Sheet
according to Regulation (EC) No 1907/2006

Alpine TS 10W40
Print date: 24.08.2017

Page 5 of 7

Product code: MIT0005

Sensitising effects
Based on available data, the classification criteria are not met.
Frequently or prolonged contact with skin may cause dermal irritation.
Carcinogenic/mutagenic/toxic effects for reproduction
Based on available data, the classification criteria are not met.
STOT-single exposure
Based on available data, the classification criteria are not met.
STOT-repeated exposure
Based on available data, the classification criteria are not met.
Aspiration hazard
Based on available data, the classification criteria are not met.
Additional information on tests
This mixture is classified as hazardous according to regulation (EC) No. 1272/2008 [CLP]. Special hazards
arising from the substance or mixture!

SECTION 12: Ecological information
12.1. Toxicity
The product is not: Ecotoxic.
12.2. Persistence and degradability

Not readily biodegradable (according to OECD criteria)
12.3. Bioaccumulative potential

The product has not been tested.
12.4. Mobility in soil
The product has not been tested.
12.5. Results of PBT and vPvB assessment
The product has not been tested.
12.6. Other adverse effects
No information available.
Further information
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.

SECTION 13: Disposal considerations
13.1. Waste treatment methods
Advice on disposal
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. Dispose of waste
according to applicable legislation.
Waste disposal number of waste from residues/unused products
OIL WASTES AND WASTES OF LIQUID FUELS (except edible oils, and those in chapters 05, 12
130205
and 19); waste engine, gear and lubricating oils; mineral-based non-chlorinated engine, gear and
lubricating oils
Classified as hazardous waste.
Contaminated packaging
This material and its container must be disposed of as hazardous waste. Handle contaminated packages in the
same way as the substance itself.

SECTION 14: Transport information
Land transport (ADR/RID)
14.1. UN number:
Revision No: 1,01

No dangerous good in sense of this transport regulation.
GB - EN

Revision date: 14.08.2017

Mitan Mineralöl GmbH

Safety Data Sheet
according to Regulation (EC) No 1907/2006

Alpine TS 10W40
Print date: 24.08.2017

Page 6 of 7

Product code: MIT0005

14.2. UN proper shipping name:

No dangerous good in sense of this transport regulation.

14.3. Transport hazard class(es):

No dangerous good in sense of this transport regulation.

14.4. Packing group:

No dangerous good in sense of this transport regulation.

Inland waterways transport (ADN)
14.1. UN number:

No dangerous good in sense of this transport regulation.

14.2. UN proper shipping name:

No dangerous good in sense of this transport regulation.

14.3. Transport hazard class(es):

No dangerous good in sense of this transport regulation.

14.4. Packing group:

No dangerous good in sense of this transport regulation.

Marine transport (IMDG)
14.1. UN number:

No dangerous good in sense of this transport regulation.

14.2. UN proper shipping name:

No dangerous good in sense of this transport regulation.

14.3. Transport hazard class(es):

No dangerous good in sense of this transport regulation.

14.4. Packing group:

No dangerous good in sense of this transport regulation.

Air transport (ICAO)
14.1. UN number:

No dangerous good in sense of this transport regulation.

14.2. UN proper shipping name:

No dangerous good in sense of this transport regulation.

14.3. Transport hazard class(es):

No dangerous good in sense of this transport regulation.

14.4. Packing group:

No dangerous good in sense of this transport regulation.

14.5. Environmental hazards

ENVIRONMENTALLY HAZARDOUS:

no

14.6. Special precautions for user
No dangerous good in sense of this transport regulation.
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
No dangerous good in sense of this transport regulation.

SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
EU regulatory information
Additional information
To follow: 850/2004/EC, 1107/2009/EC, 649/2012/EC.
National regulatory information

Employment restrictions:

Water contaminating class (D):

Observe restrictions to employment for juvenils according to the 'juvenile
work protection guideline' (94/33/EC). Observe employment restrictions
under the Maternity Protection Directive (92/85/EEC) for expectant or
nursing mothers.
2 - water contaminating

15.2. Chemical safety assessment

Chemical safety assessments for substances in this mixture were not carried out.

SECTION 16: Other information
Abbreviations and acronyms
ADR: Accord européen sur le transport des marchandises dangereuses par Route
(European Agreement concerning the International Carriage of Dangerous Goods by Road )
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
Revision No: 1,01

GB - EN

Revision date: 14.08.2017

Mitan Mineralöl GmbH

Safety Data Sheet
according to Regulation (EC) No 1907/2006

Alpine TS 10W40
Print date: 24.08.2017

Page 7 of 7

Product code: MIT0005

EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service
LC50: Lethal concentration, 50%
LD50: Lethal dose, 50%
Further Information
The above information describes exclusively the safety requirements of the product and is based on our
present-day knowledge. The information is intended to give you advice about the safe handling of the product
named in this safety data sheet, for storage, processing, transport and disposal. The information cannot be
transferred to other products. In the case of mixing the product with other products or in the case of
processing, the information on this safety data sheet is not necessarily valid for the new made-up material.

(The data for the hazardous ingredients were taken respectively from the last version of the sub-contractor's safety
data sheet.)

Revision No: 1,01

GB - EN

Revision date: 14.08.2017




Télécharger le fichier (PDF)

SI_Alpine TS 10W40_GB-en-R-1,01.pdf (PDF, 349 Ko)

Télécharger
Formats alternatifs: ZIP







Documents similaires


safety data sheet universal abs
safety data sheet techstrong
si alpine ts 10w40 gb en r 1 01
msds mooncherry miss monica
msds r0950
awg spaghetti safetydatsheeta

Sur le même sujet..