MXer50 cap 18 (strumentazione frecce clacson) .pdf
Nom original: MXer50 cap 18 (strumentazione frecce clacson).pdf
Ce document au format PDF 1.3 a été généré par Word / Mac OS X 10.2.8 Quartz PDFContext, et a été envoyé sur fichier-pdf.fr le 18/03/2013 à 14:17, depuis l'adresse IP 92.155.x.x.
La présente page de téléchargement du fichier a été vue 639 fois.
Taille du document: 370 Ko (3 pages).
Confidentialité: fichier public
Aperçu du document
18. ONLY ATV ON ROAD AVAILABLE
MX’er 50
18
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
18
ONLY ATV ON ROAD AVAILABLE
__________________________________________________________________________________
INSTRUMENT ---------------------------------------------------------- 18- 1
INDICATOR LIGHT---------------------------------------------------- 18- 1
WINKER SWITCH/HORN --------------------------------------------- 18- 2
18-0
18. ONLY ATV ON ROAD AVAILABLE
MX’er 50
INSTRUMENT
REMOVAL
Remove the two instrument attaching
screws.
Disconnect the instrument.
Screws
Battery Cover
Remove battery cover on instrument back to
replace battery.
°Ø
After replace battery, the instrument
will be reset. (Refer to owner’s manual)
SENSOR WHEEL
If the sensor is lost or wore, the speed will
be not calculated on the instrument.
INDICATOR LIGHT
REMOVAL
Remove the screw and disconnect the cover
of the ignition switch.
18-1
Speed Wheel
Screw
18. ONLY ATV ON ROAD AVAILABLE
Remove the bulb socket and bulb.
Check the bulb for damage and replace with
a new one if necessary.
MX’er 50
Bulb Socket
INSTALLATION
The installation sequence is the reverse of
removal.
Bulb
Hazard Switch
WINKER SWITCH
Check for continuity between the wires
indicated below.
L
Sky Orange Brown
Blue
°≥
°≥
R
°≥
Color
Position
°≥
HORN SWITCH
Check for continuity between the wires
indicated below.
Color
Position
Light
Green
Black
°≥
°≥
FREE
PUSH
Horn Switch
Bolt
Horn Switch wire
HORN
REMOVAL
Disconnect the horn switch wire.
Remove the bolt and remove horn.
INSTALLATION
The installation sequence is the reverse of
removal.
18-2
Télécharger le fichier (PDF)
MXer50 cap 18 (strumentazione frecce clacson).pdf (PDF, 370 Ko)
Documents similaires
Sur le même sujet..
between
instrument
replace
available
disconnect
removal
battery
speed
remove
light
cover
installation
switch
sequence
check